2.4.6
PCI即插即用设备 (PCI PnP)
本菜单项目可让您更改 PCI/PnP 设备的高级设置。菜单包括为 PCI/PnP 或 legacy
ISA 设备设置IRQ 和 DMA 通道源。
请谨慎更改 PCIPnP 菜单项目的设置。不正确的设置可能造成系统故障。
Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections may cause
system to malfunction.
Plug And Play O/S
PCI Lantency Timer
Allocate IRQ to PCI VGA
Palette Snooping
IRQ3 assigned to
IRQ4 assigned to
IRQ5 assigned to
IRQ7 assigned to
IRQ9 assigned to
IRQ10 assigned to
IRQ11 assigned to
IRQ14 assigned to
IRQ15 assigned to
Plug and Play O/S [No]
当本项目设置为[No]时,BIOS 将设置系统中的所有设备;当本项目设置为 [Yes]且
您安装了即插即用设备时,操作系统将设置非启动用即插即用设备。
设置值有: [No] [Yes]
PCI Latency Timer [64]
本项目可让您设置 PCI 设备延迟时间。
设置值有: [32] [64] [96] [128] [160] [192] [224] [248]
Allocate IRQ to PCI VGA [Yes]
当本项目设置为[Yes]且 PCI 显卡需要分配 IRQ 时,BIOS 将为其分配一个 IRQ;当
本项目设置为[No]时,即使 PCI 显卡需要 BIOS 也不会为其分配 IRQ。
设置值有: [Yes] [No]
Palette Snooping [Disabled]
当本项目设置为[Enabled]时,Palette Snooping 功能会通知 PCI 设备系统中安装了一
个 ISA 图形设备,以便日后正常运行。 设置值有: [Disabled] [Enabled]
华硕 M2S-X 主板用户手册
[No]
[64]
[Yes]
[Disabled]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
NO: Lets the BIOS
configure all the
devices in the system.
YES: Lets the
operating system
configure Plug and
Play (PnP) devices not
required for boot if
your system has a Plug
and Play operating
system
-
Need help?
Do you have a question about the M2S-X and is the answer not in the manual?