Setting The Ps/2 And Usb Wake Configuration Jumper Blocks; Ps/2 Port And Usb Port Wake Configuration Jumper Block Locations; Jumper Settings For The Ps/2 Ports - Intel D815EGEW Product Manual

Setting the PS/2 and USB Wake Configuration Jumper
Blocks
The 3-pin PS/2 jumper block, labeled J2B1, enables configuration of the two PS/2 ports. The 3-pin
USB port jumper block, labeled J2B2, enables configuration of the two USB ports. Figure 18
shows the location of these jumpers on the board.
Figure 18. PS/2 Port and USB Port Wake Configuration Jumper Block Locations
Table 7 describes the jumper settings for configuring the PS/2 mouse and keyboard ports.
Table 7.

Jumper Settings for the PS/2 Ports

Jumper Setting
1-2
1
2-3
1
1
None
1
Configuration
Allows wake from ACPI state S1
3
Allows wake from keyboard/mouse in all ACPI states
3
(must also set ACPI BIOS option to S3)
3
PS/2 ports will not function
Installing and Replacing Desktop Board Components
1
3
J2B2
OM12687
3
J2B1
35