Power Supply; Charging - Casio EXILIM EX - Digital Camera - 3.2 Megapixel User Manual

Any and all unauthorized commercial copying, distribution, and copying of the
bundled software over a network are prohibited.
This product contains PrKERNELv4 Real-time OS of eSOL
Co., Ltd. Copyright
PrKERNELv4 is a registered trademark of eSOL Co., Ltd. in
Japan.
This product's YouTube upload functionality is included under license from YouTube,
LLC. The presence of YouTube upload functionality in this product is not an
endorsement or recommendation of the product by YouTube, LLC.

Power Supply

Charging

If the [CHARGE] lamp does not light...
Charging cannot be performed because ambient temperature or the temperature of
the charger is too hot or too cold. Wait until the camera returns to normal
temperature. When the camera returns to a temperature where charging can be
performed, the [CHARGE] lamp will light red.
Operating Temperature : 5°C to 35°C (41°F to 95°F)
If the [CHARGE] lamp does not light red even within the specified operating
temperature, the battery is faulty or the battery is loaded in the charger incorrectly.
Remove the battery from the charger and check if its contacts are dirty. If contacts
become dirty, wipe them clean with a dry cloth. When experiencing charging
problems, also check to make sure that the power cord is not disconnected from the
power outlet or charger.
If problems continue to occur after you perform the above steps, it could mean that
the battery is faulty. Contact your nearest CASIO authorized service center.
2007 eSOL Co., Ltd.
©
157
Appendix