Table of Contents
Advertisement
Select & Save
After continuous shutter shooting is finished, the shot images are played back
at slow speed so you can select the images you want to save.
• Images shot with Prerecord (Still Image) (page 50) are played back
automatically in reverse sequence, and then played slowly in forward
sequence. Images recorded with other CS modes are played back in forward
sequence.
• When you shooting with Prerecord (Still Image), the first image saved when
you press the shutter all the way is indicated by an "S" mark so you can tell
where the continuous shutter operation started.
While the shot images are playing back and an
1
image appears that you want to save, press the
shutter button. Each image that you select by
pressing the shutter button will have a mark
appended to it.
After selecting all of the images you want to save,
2
press [8].
Buttons Used for Image Selection
[4] [6]
Control
dial
[SET]
Shutter
button
[8]
Use [8] and [2] to select the save method you want and then press [SET].
3
Save Selected: Saves selected images.
Save All
Cancel Save : Does not save any of the images.
During playback, changes the playback direction and playback
speed.
While playback is paused, scrolls forward or back.
During playback, changes the playback direction and playback
speed.
While playback is paused, scrolls forward or back.
Toggles between pause and play.
Press all the way down to select an image for saving.
Saves the selected images and exits the image select
operation.
: Saves all the images.
59
Mark
Snapshot Tutorial
Advertisement
Table of Contents
