To shoot a snapshot
1.
Remove the lens cap and then press [r] (REC) to turn on the camera.
2.
Set the mode dial to t (Auto).
3.
Set the CS dial to t (Single Shot).
• You can use either monitor screen or viewfinder to compose the image. Each
press of the [EVF/LCD] button cycles through the available monitor screen and
viewfinder on/off settings (page 146). If the image in the viewfinder appears
blurry, use the diopter dial to adjust it.
Snapshot mode icon
4.
Point the camera at
the subject.
You can zoom the
image, if you want.
5.
Half-press the shutter
button to focus the image.
When focus is complete, the
camera will beep, the back
lamp will light green, and the
focus frame will turn green.
[r] (REC)
Diopter dial
Viewfinder
Monitor screen
Zoom controller
Back lamp
18
CS dial
Shutter button
Mode dial
[EVF/LCD]
z Telephoto
w Wide Angle
Focus frame
Quick Start Basics
Need help?
Do you have a question about the EXILIM EX - Digital Camera - 3.2 Megapixel and is the answer not in the manual?
Questions and answers