Table of Contents
Advertisement
4.
Turn off the camera and then use the USB cable that comes with the
camera to connect it to your Macintosh.
USB port
• The camera does not draw power over the USB cable. Make sure the camera's
battery is sufficiently charged before connecting.
• Make sure that you insert the cable connector into the USB/AV port until you
feel it click securely into place. Failure to insert the connector fully can result in
poor communication or malfunction.
• Note that even while the connector is fully inserted, you still will
be able to see the metal part of the connector as shown in the
illustration.
• When connecting the USB cable to a USB port, make sure you
align the connector correctly with the port.
5.
Turn on the camera.
The camera's back lamp will light green at this time. In this mode, your Macintosh
recognizes the memory card loaded in the camera (or the camera's built-in
memory if it does not have a memory card loaded) as a drive. The appearance of
the drive icon depends on the Mac OS version you are using.
6.
Double-click the camera's drive icon.
7.
Drag the "DCIM" folder to the folder to which you want to copy it.
8.
After the copy operation is complete, drag the drive icon to Trash.
9.
On the camera, press [ON/OFF] to turn off the camera. After making
sure that the green back lamp is unlit, disconnect the camera from the
computer.
Large connector
USB cable
USB/AV port
Small connector
Making sure that the 6 mark on the camera
is aligned with the 4 mark of the USB cable
connector, connect the cable to the camera.
131
Using the Camera with a Computer
Advertisement
Table of Contents
