Casio EXILIM EX-FH20 User Manual
  1. Manuals
  2. Brands
  3. Casio Manuals
  4. Digital Camera
  5. EXILIM EX-FH20
  6. User manual

Casio EXILIM EX-FH20 User Manual

Casio digital camera user's guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

E

Digital Camera

User's Guide
K1160PCM2DMX
Thank you for purchasing this CASIO product.
• Before using it, be sure to read the precautions contained in this User's Guide.
• Keep the User's Guide in a safe place for future reference.
• For the most up-to-date information about this product, visit the official EXILIM
Website at http://www.exilim.com/

Advertisement

Table of Contents
loading

Related Manuals for Casio EXILIM EX-FH20

Summary of Contents for Casio EXILIM EX-FH20

  • Page 1: Digital Camera

    Digital Camera User’s Guide K1160PCM2DMX Thank you for purchasing this CASIO product. • Before using it, be sure to read the precautions contained in this User’s Guide. • Keep the User’s Guide in a safe place for future reference. • For the most up-to-date information about this product, visit the official EXILIM...

  • Page 2: Unpacking

    Unpacking As you unpack your camera, check to make sure that all items shown below are included. If anything is missing, contact your original retailer. Alkaline batteries Digital camera Strap (4 AA-size batteries) Lens cap/cap holder USB cable AV cable...

  • Page 3: Read This First

    CASIO COMPUTER CO., LTD. is forbidden under copyright laws. • CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost profits suffered by you or any third party due to the use or malfunction of this product.

  • Page 4: Table Of Contents

    What is a digital camera? ........9 What you can do with your CASIO camera ......10 Attaching the Lens Cap and Strap .
  • Page 5 Using Flash Continuous Shutter ........50 Using High-speed CS and Prerecord CS .
  • Page 6 Reducing Underexposure and Overexposure ..(Dynamic Range) . . . 85 Specifying Flash Intensity ......(Flash Intensity) . . . 86 Turning On Flash Assist .
  • Page 7 Uploading Movie Files to YouTube ........116 Viewing User Documentation .
  • Page 8 Using Household Power ......... . 150 Using a Memory Card .

  • Page 9: Quick Start Basics

    Quick Start Basics What is a digital camera? A digital camera stores images on a memory card, so you can record and delete images a countless number of times. Record Delete Play You can use the images you record in a variety of different ways.

  • Page 10: What You Can Do With Your Casio Camera

    What you can do with your CASIO camera Your CASIO camera is packed with a powerful selection of features and functions to make recording of digital images easier, including the following three main functions. High-speed Continuous Shutter Prerecord (Still image)

  • Page 11: Attaching The Lens Cap And Strap

    Attaching the Lens Cap and Strap Be sure to attach the lens cap and strap to the camera before using it. . Attaching the Lens Cap Always keep the lens cap on the lens whenever you are not using the camera. Always leave the lens cap on the lens when the camera is turned off and the lens is retracted.

  • Page 12: To Load The Batteries

    To load the batteries Use one of the following battery types. • Four AA-size alkaline batteries: LR6 Recommended – Panasonic LR6 (Panasonic Corporation) – DURACELL ULTRA (MX1500) (DURACELL,div of P&G Inc.) • Four AA-size rechargeable Ni-MH (nickel-metal hydride) batteries: HR6 Recommended –...
  • Page 13 Close the battery cover. • For information about how to replace the batteries, see page 146. IMPORTANT! • Before using the camera, you must specify the type of battery type (alkaline, Ni-MH) you are using. Specifying the wrong battery type setting will shorten the life of the batteries you are using.
  • Page 14 Checking Remaining Battery Power As battery power is consumed, a battery indicator on the monitor screen indicates remaining power as shown below. Remaining Power Battery Indicator Indicator Color The flash will take longer than normal to charge if it is being used when the battery level indicator is showing Type”...

  • Page 15: Specifying The Battery Type

    Specifying the Battery Type Your camera is designed to optimize its operation in accordance with the type of batteries you are using to power it. Specifying the wrong battery type, can cause power to turn off without retracting the lens and incorrect indication of remaining battery power.
  • Page 16 Use [8], [2], [4], and [6] to select the language you want and then press [SET]. Use [8], [2], [4], and [6] to select the area where you will be using the camera and then press [SET]. The selected area is highlighted in red. Use [8] and [2] to select the city where you will be using the camera and then press [SET].

  • Page 17: Preparing A Memory Card

    In order to avoid problems such as these, use of an Ultra High-Speed Type SD memory card is recommended. Note, however that CASIO makes no guarantees about the operation of any Ultra High-Speed Type SD memory card used with this camera.

  • Page 18: To Format (Initialize) A New Memory Card

    • Should water or any foreign object ever get into the card slot, immediately turn off the camera, remove the batteries, and contact your retailer or nearest CASIO authorized service center. To format (initialize) a new memory card You need to format a new memory card before using it for the first time.

  • Page 19: Turning The Camera On And Off

    Turning the Camera On and Off To turn power on To enter the REC mode, press [ON/OFF] (Power) or [r] (REC). To enter the PLAY mode, press [p] (PLAY). The back lamp will light (green) momentarily and the camera will turn on. If you are entering the REC mode, the lens will extend from the camera at this time.

  • Page 20: To Shoot A Snapshot

    To shoot a snapshot Diopter dial [EVF/LCD] Viewfinder Remove the lens cap and then press [r] (REC) to turn on the camera. Set the mode dial to t (Single Shot). Press [8] . Use [8] and [2] to select the top option in the control panel (Exposure mode).
  • Page 21 Point the camera at the subject. You can zoom the image, if you want. Half-press the shutter button to focus the image. When focus is complete, the camera will beep, the back lamp will light green, and the focus frame will turn green. Half-press Press lightly until the...

  • Page 22: Using Quick Shutter

    IMPORTANT! • While the “Anti Shake” setting is “D Auto” or “ A Camera AS”, half pressing the shutter will cause the camera to vibrate and emit an operation sound. This is normal and does not indicate malfunction (page 79). .

  • Page 23: Holding The Camera Correctly

    Holding the Camera Correctly Your images will not come out clearly if you move the camera when you press the shutter button. When pressing the shutter button, be sure to hold the camera as shown in the illustration near by, and keep it still by pressing your arms firmly against your sides as you shoot.

  • Page 24: Viewing Snapshots

    Viewing Snapshots Use the following procedure to view snapshots on the camera’s monitor screen. • For information about how to play back movies, see page 88. • For information about images recorded using continuous shutter (CS), see page • For information about high-speed movies, see page 59. Press [p] (PLAY) to enter the PLAY mode.

  • Page 25: Deleting Images

    Deleting Images If memory becomes full, you can delete images you no longer need in order to free up storage and record more images. • Remember that a file (image) delete operation cannot be undone. • For information about images recorded using continuous shutter (CS), see page To delete a single file Press [p] (PLAY) to enter the PLAY mode and then press [2] (...

  • Page 26: Snapshot Shooting Precautions

    Snapshot Shooting Precautions Operation • Never open the battery cover while the back lamp is flashing green. Doing so can result in the image you just shot being saved incorrectly, damage to other images stored in memory, malfunction of the camera, etc. •...

  • Page 27: Snapshot Tutorial

    Snapshot Tutorial Selecting a Recording Mode Your camera has a variety of different recording modes. Before shooting, use the mode dial to select the recording mode that suits the type of subject you are trying to record. This mode will record consecutive images while firing the flash. See Flash CS ª...

  • Page 28: Using The Control Panel

    Using the Control Panel The control panel can be used to configure camera settings. In the REC mode, press [8]. Use [8] and [2] to select the setting you want to change. This will select one of the control panel icons and display its settings.

  • Page 29: Selecting The Exposure Mode

    Selecting the Exposure Mode Your camera has a variety of different exposure modes. Before shooting an image, select the exposure mode that suits the type of subject you are shooting. In the REC mode, press [8] . Use [8] and [2] to select the top option in the control panel (Exposure mode).
  • Page 30 S S (Shutter Speed Priority) mode In this mode, you select the shutter speed and other settings are adjusted accordingly. Use [4] and [6] to select the desired shutter speed. • The ISO sensitivity, shutter speed and aperture value on the monitor screen will turn orange when you half- press the shutter button if the image is over-exposed or under-exposed.

  • Page 31: Changing The Image Size

    Changing the Image Size (Size) . Pixels A digital camera image is a collection of small dots called “pixels”. The more pixels there are in an image, the more detail there will be. However, you generally can do with fewer...
  • Page 32 . About image sizes The size of an image indicates how many pixels it contains, and is expressed as horizontal pixels vertical pixels. 8M (3264 2448) size image = Approximately 8 million pixels VGA (640 480) size image = Approximately 300,000 pixels Image Size Selection Tips Note that larger images have more pixels, so they take up more memory space.
  • Page 33 . To select the image size In the REC mode, press [8] . Use [8] and [2] to select the second control panel option from the top (Image Size). Use [ ] and [6] to select an image size and then press [SET]. Suggested Image Size Print Size and...
  • Page 34 Suggested Image Size Print Size and (Pixels) Application 3.5" 5" Print (1600 1200) E Mail (640 480) • The initial factory default image size setting is 9M (9 million pixels). • Selecting 3:2 (3456 2304 pixels) records images with an aspect ratio of 3:2, which matches the standard aspect ratio of print paper.

  • Page 35: Using Flash

    Using Flash (Flash) Press (Flash up) to open the ð flash unit. • The flash will not fire if the flash unit is not open. In the REC mode, press [2] ( once. Use [4] and [6] to select the flash setting you want and then press [SET].
  • Page 36 IMPORTANT! • The camera will not release the shutter unless the flash unit is raised when any one of the following conditions exists. Be sure to raise the flash unit whenever shooting with flash is required. – When shooting with Flash CS, which requires the flash to fire –...
  • Page 37 Red-eye Reduction Using the flash to shoot at night or in a dimly lit room can cause red spots inside the eyes of people who are in the image. This is caused when the light from the flash reflects off of the retina of the eye. When red-eye reduction is selected as the flash mode, the camera fires a pre-flash to cause the irises in the eyes of any people in the image to close, which reduces the chance of red eye.

  • Page 38: Specifying Iso Sensitivity

    Specifying ISO Sensitivity (ISO) ISO sensitivity is a measure of sensitivity to light. In the REC mode, press [8] . Use [8] and [2] to select the third control panel option from the top (ISO Sensitivity). Use [4] and [6] to select the setting you want and then press [SET]. AUTO Adjusts sensitivity automatically according to conditions Lower...
  • Page 39 Use [4] and [6] to select the shooting condition you want and then press [SET]. Auto WB Configures the camera to adjust white balance automatically ‡ Daylight For shooting outdoors on a clear day ¤ For shooting outdoors on an overcast rainy day, in the Overcast shade, etc.

  • Page 40: Correcting Image Brightness

    Correcting Image Brightness (EV Shift) You can manually adjust an image’s exposure value (EV value) before shooting it. • Exposure Compensation Range: –2.0EV to +2.0EV • Unit: 1/3EV In the REC mode, press [8] . Use [8] and [2] to select the fifth control panel option from the top (EV Shift).

  • Page 41: Specifying The Metering Mode

    Specifying the Metering Mode (Metering) The metering mode determines what part of the subject is metered for exposure. In the REC mode, press [8] . Use [8] and [2] to select the sixth control panel option from the top (Metering). Use [4] and [6] to select the setting you want and then press [SET].
  • Page 42 Use [4] and [6] to select the setting you want and then press [SET]. This mode takes readings of a small area in the center of the image. Spot This setting works well with focus lock (page 48). You can move the focus frame by using [8], [2], [4], and [6] to move the focus point and then pressing [SET].

  • Page 43: Changing The Control Panel Date/Time Style

    Changing the Control Panel Date/Time Style In the REC mode, press [8] . Use [8] and [2] to select the bottom control panel option (Date/Time). You can use [4] and [6] to select date or time display. NOTE • You can select either of two display styles (page 130) for the date: Month/Day or Day/Month.

  • Page 44: Optical Zoom/Digital Zoom Switch Point

    NOTE • The higher the digital zoom factor, the coarser the recorded image. Note that the camera also has a function that lets you record using digital zoom without image deterioration (page 44). • Use of a tripod is recommended to protect against image blur due to camera movement when shooting with telephoto.
  • Page 45 Undeteriorated digital zoom Undeteriorated image quality range Optical/digital zoom switch point 20X optical zoom point • The deterioration point depends on the current image size setting (page 31). The smaller the image size setting, the higher the zoom factor you can use before reaching the image deterioration point.

  • Page 46: Selecting A Focus Mode

    Selecting a Focus Mode (Focus) Each press of @ (Focus) will cycle through the available focus mode settings. • Whenever you change to another focus mode, the previous focus point is saved, so you can use Auto Focus for initial focus, and then switch to Manual Focus to make fine adjustments.
  • Page 47 NOTE • When proper focusing is not possible because the subject is closer than the Auto Focus range, the camera will switch to the Macro Focus range (which does not include the Super Macro range) automatically (Auto Macro). • When proper focusing is not possible because the subject is further than the macro range (which does not include the Super Macro range), the camera will switch to the Auto Focus range automatically (Auto Macro).
  • Page 48 Using Focus Lock “Focus lock” is a technique you can use when you want to compose an image in which the subject you want to focus on is not within the focus frame in the center of the screen. • To use focus lock, select “U Spot” or “O Tracking” for the Auto Focus area (page 41).

  • Page 49: Locking The Auto Exposure And Auto Focus Setting

    Locking the Auto Exposure and Auto Focus Setting Pressing [AEL] temporarily locks the current exposure and/or focus settings. Press [AEL] again to unlock the settings. • Pressing [AEL] while the shutter button is half-pressed will lock the current exposure or focus setting. Specifying the [AEL] button Operation Use the following procedure to specify the operation that the [AEL] button performs.

  • Page 50: Using Continuous Shutter

    Using Continuous Shutter Using Flash Continuous Shutter This mode will record consecutive images while firing the flash. • You can select a CS speed of 1 image, 3 images, or 5 images per second. • In this mode, you can specify consecutive recording of three to 10 images.

  • Page 51: Using High-Speed Cs And Prerecord Cs

    NOTE • The back lamp flashes red while the flash is charging. You will not be able to perform further Flash CS shooting until charging is complete, which is indicated when the back lamp stops flashing and goes out. • When shooting with Flash CS, there may be times when a message appears telling you to wait, because you have reached the limit of the flash.
  • Page 52 Set the mode dial to Use [8] and [2] to select the second control panel option from the bottom (High-speed CS fps). Use [4] and [6] to select the continuous shutter (CS) speed you want and then press [SET]. Use [8] and [2] to select the bottom control panel option (Prerecord (Still image) Time).

  • Page 53: Specifying The Method For Saving Continuous Shutter Images

    Press the shutter button the rest of the way down. This will record the images in the pre-record buffer and start recording new images in real-time. Images continue to be shot as long as you keep the shutter button depressed. Image recording will stop when you release the shutter button or after a total of 40 images are recorded.
  • Page 54 Select & Save After continuous shutter shooting is finished, the shot images are played back at slow speed so you can select the images you want to save. • When shooting with Prerecord (Still Image), the first image saved when you press the shutter all the way is indicated by an “S”...

  • Page 55: Continuous Shutter Precautions

    Continuous Shutter Precautions • If there is not enough available capacity on the memory card, you may not be able to record the number of CS images indicated on the monitor screen. Make sure your memory card has sufficient remaining capacity before shooting with using continuous shutter.

  • Page 56: Recording Movies

    Recording Movies To record a movie The following procedure explains how to record a standard (STD) movie. Set the mode dial to Press [8] . Use [8] and [2] to select the second control panel option from the top (HD/STD switching). Use [4] and [6] to select “STD”...

  • Page 57: Audio

    Audio Your camera has a built-in microphone that can be used to record audio (monaural) during movie recording. . Recording Precautions The camera also records audio. Note the following points when shooting a movie. – Take care that the microphone is not blocked by your fingers, etc.
  • Page 58 In order to avoid problems such as these, use of an Ultra High- Speed Type SD memory card is recommended. Note, however that CASIO makes no guarantees about the operation of any Ultra High-Speed Type SD memory card used with this camera.

  • Page 59: Recording A High-Definition Movie

    Recording a High-definition Movie This camera supports recording of high-definition (HD) movies. The aspect ratio of an HD movie is 16:9, the image size is 1280 Image quality and image size settings cannot be changed. Set the mode dial to Press [8] .
  • Page 60 Use [ ] and [6] to select the frame rate (recording speed) of the movie you want and then press [SET]. A fast frame rate (such as 1000 fps) will result in a smaller image size. Record the movie the same way as you would a normal movie (page 56).

  • Page 61: Using Prerecord Movie

    Using Prerecord Movie (Prerecord (Movie)) With this feature, the camera pre-records up to five seconds of whatever is happening in front of the lens in a buffer that is continually updated. Pressing [0] saves the prerecorded action (buffer contents) followed by real-time recording. Real-time recording continues until you stop it.

  • Page 62: Recording A Movie For Youtube

    Record the movie. The movie file will be stored in a camera folder named “100YOUTB”. • Installing YouTube Uploader for CASIO from the CD-ROM that comes with your camera simplifies uploading of movie files you recorded with the YouTube Mode to YouTube (page 124).

  • Page 63: Turning Optical Zoom On Or Off

    Turning Optical Zoom On or Off (Optical Zoom) You can use the following procedure to turn optical zoom (page 44) on or off while “HD/STD” is selected as the movie mode. Set the mode dial to Press [8]. Use [8] and [2] to select the fourth control panel option from the bottom (Optical Zoom).

  • Page 64: Using Best Shot

    Using BEST SHOT What is BEST SHOT? BEST SHOT provides you with a collection of sample “scenes” that show a variety of different types of shooting conditions. When you need to change the setup of the camera, simply find the scene that matches what you are trying to achieve, and the camera sets up for it automatically.
  • Page 65 . Using the Scene Information Screen To find out more about a scene, select it with the boundary on the scene menu and then slide the zoom controller in either direction. • To return to the scene menu, slide the zoom controller again.

  • Page 66: Creating Your Own Best Shot Setups

    Creating Your Own BEST SHOT Setups You can save up to 999 camera setups as user BEST SHOT scenes for instant recall whenever you need them. On the BEST SHOT scene menu, select the scene named BEST SHOT (Register User Scene). Use [4] and [6] to select the snapshot whose setup you want to save.

  • Page 67: Shooting With High Speed Night Scene

    Shooting with High Speed Night Scene (High Speed Night Scene) With High Speed Night Scene, the camera detects automatically whether it is being hand-held or on a tripod. When you press the shutter button, the camera will record a series of image and combine them in a way that minimizes image blur due to low light conditions.

  • Page 68: Shooting With High Speed Anti Shake

    Shooting with High Speed Anti Shake (High Speed Anti Shake) When you press the shutter button while High Speed Anti Shake is enabled, the camera records multiple images and automatically combines them in a way that produces a final image with minimal blur. You can shoot with this feature to minimize the effects of camera movement when shooting with optical anti shake does not produce the desired results.

  • Page 69: Shooting With Digital Panning

    Shooting with Digital Panning (Digital Panning) When you point the camera at a moving object and pan as you press the shutter button, the camera will perform a continuous shutter operation, recording multiple images. Then it will automatically correct for blurring of the subject only in the recorded images and combine them into a single image that shows a clear subject on a blurred background.
  • Page 70 Release the shutter button. Continuous Shutter shooting will stop and the resulting composite image will appear on the monitor screen. • The above procedure shoots multiple images and combines them automatically into a final image. Do not move the camera until shooting is complete.

  • Page 71: Shooting An Image In Accordance With Subject Movement

    Shooting an Image in Accordance with Subject Movement (Move Out CS/Move In CS) You can use these features to shoot an image automatically whenever the subject moves into or moves out of a frame on the monitor screen. You also can configure the camera to record images of what happened immediately before and after the subject moves.
  • Page 72 Use [4] and [6] to select the subject movement sensitivity, and then press [SET]. • You can select any one of three sensitivity levels: “High”, “Normal”, or “Low”. • Move Out CS Setting Guide High: For a subject that moves out of the boundary quickly Low : For a subject that moves out of the boundary slowly •...

  • Page 73: Monitor Screen

    . To shoot using Move Out CS Compose the image so the subject is within the boundary on the monitor screen. Half-press the shutter button. • The camera will adjust exposure and focus automatically. When the boundary on the monitor screen turns green, press the shutter button the rest of the way down.
  • Page 74 . To shoot using Move In CS Compose the image at a location where you expect the subject to enter the boundary on the monitor screen. Half-press the shutter button. • The camera will adjust exposure and focus automatically. • In this case, use of manual focus (page 46) to preset a fixed focus is recommended.
  • Page 75 NOTE • Compose the image so the entire subject and its background are within the boundary. Recording may not be performed correctly if there is little difference between the subject and the part of the background enclosed by the boundary. Also, Move Out CS may not record correctly if the subject is not in the center of the boundary.

  • Page 76: Advanced Settings

    Advanced Settings The following are menu operations you can use to configure various camera settings. Using On-screen Menus . Example Menu Screen Operation Press [MENU] to display the menu screen. • Menu contents are different in the REC mode and PLAY mode. Example: REC mode menu Menu Screen Operation Buttons Selects tabs.
  • Page 77 Use [8] and [2] to select the menu item you want, and then press [6]. Use [8] and [2] to change the setting. After the setting is the way you want, press [SET]. • Pressing [ ] registers the selected setting and returns to the menu.

  • Page 78: Rec Mode Settings

    REC Mode Settings (REC) Using the Self-timer (Self-timer) Procedure [r] (REC) *[MENU] * REC Tab * Self-timer With the Self-timer, pressing the shutter button starts a timer. The shutter is released and the image is shot after a fixed amount of time. 10 sec 10-second Self-timer „...

  • Page 79: Using The Auto Focus Assist Light

    Using the Auto Focus Assist Light (AF Assist Light) Procedure [r] (REC) * [MENU] * REC Tab * AF Assist Light Half-pressing the shutter button while this setting is selected causes the front lamp to light, which provides illumination for focusing in areas where lighting is dim. Leaving this function turned off is recommended when shoot portraits from short distances, etc.

  • Page 80: Shooting With Face Detection

    NOTE • Only “ A Camera AS” can be used during movie recording. • The ISO sensitivity setting (page 38) must be “AUTO” for “S Image AS” to work. • If the flash fires, the Anti Shake icon will remain on the display, even though Anti Shake does not function during flash photography.

  • Page 81: Shooting With Continuous Auto Focus

    Tips for Best Face Detection Results • The camera performs center focus if it cannot detect a face. • Always make sure that Auto Focus (AF) is selected as the focus mode when shooting with face detection. • Detection of the following types of faces is not supported. –...

  • Page 82: Specifying The [Ael] Button Operation

    Specifying the [AEL] button Operation (AE/AF Lock) Procedure [r] (REC) * [MENU] * REC Tab * AE/AF Lock See page 49 for details. Configuring the Continuous Shutter Image Save Method (Save CS Images) Procedure [r] (REC) * [MENU] * REC Tab * Save CS Images See page 53 for details.

  • Page 83: Shooting With Quick Shutter

    Shooting with Quick Shutter (Quick Shutter) Procedure [r] (REC) * [MENU] * REC Tab * Quick Shutter When Quick Shutter is turned on, you can press the shutter button all the way without waiting for Auto Focus. This will record the image using a high-speed focus operation that is much faster than Auto Focus.

  • Page 84: Using Icon Help

    Using Icon Help (Icon Help) Procedure [r] (REC) * [MENU] * REC Tab * Icon Help While Icon Help is turned on, a textual description will appear on the display for certain icons when you switch between REC functions. Function Supported by Icon Help •...

  • Page 85: Image Quality Settings

    Image Quality Settings (Quality) Specifying Snapshot Image Quality (T Quality (Snapshot)) Procedure [r] (REC) * [MENU] * Quality Tab * T Quality (Snapshot) Fine Gives image quality priority Normal Normal Economy Gives the number of images priority • The “Fine” setting helps to bring out details when shooting a finely detailed image that includes dense tree branches or leaves, or an image of a complex pattern.

  • Page 86: Specifying Flash Intensity

    Specifying Flash Intensity (Flash Intensity) Procedure [r] (REC) * [MENU] * Quality Tab * Flash Intensity You can specify flash intensity to one of 13 levels from +2 (brightest flash) to –2 (least bright flash). • Flash intensity may not change when the subject is too far away or too close. Turning On Flash Assist (Flash Assist) Procedure [r] (REC) * [MENU] * Quality Tab * Flash Assist...

  • Page 87: Controlling Image Sharpness

    Controlling Image Sharpness (Sharpness) Procedure [r] (REC) * [MENU] * Quality Tab * Sharpness You can specify one of five sharpness settings from +2 (sharpest) to –2 (least sharp). Controlling Color Saturation (Saturation) Procedure [r] (REC) * [MENU] * Quality Tab * Saturation You can specify one of five saturation settings from +2 (most saturated) to –2 (least saturated).

  • Page 88: Viewing Snapshots And Movies

    Viewing Snapshots and Movies Viewing Snapshots See page 24 for the procedure for viewing snapshots. Viewing a Movie Press [p] (PLAY) and then use [4] and [6] to display the movie you want to view. Press [SET] to start playback. Movie Playback Controls During playback, changes the playback direction and playback speed.

  • Page 89: Viewing Continuous Shutter Images

    Viewing Continuous Shutter Images Each time you perform a continuous shutter (CS) operation, the camera creates a CS group that includes all of the images for that particular CS session. You can use the following procedure to play back the images in a particular CS group. Press [ ] (PLAY) and then use [ to display the CS group whose images you...

  • Page 90: Deleting Continuous Shutter Images

    Deleting Continuous Shutter Images You can use the following procedures to delete images while playback is in progress or paused. . Deleting a Specific CS Group File While CS image playback is in progress or paused, press [ Use [ ] and [ ] to display the image you want to delete.

  • Page 91: Copying A Cs Group Image

    . Dividing Up All CS Groups While a CS group folder is displayed, press [MENU]. Use [ ] and [ ] to select “PLAY”. Use [ ] and [ ] to select “Divide Group” and then press [ Use [ ] and [ ] to select “Divide All Groups”...

  • Page 92: Zooming An On-Screen Image

    Zooming an On-screen Image In the PLAY mode, use [4] and [6] to scroll through the images until the one you want is displayed. Slide the zoom controller towards z ([) to zoom. You can use [8], [2], [4], and [6] to scroll the zoomed image on the monitor screen.

  • Page 93: Viewing Snapshots And Movies On A Tv Screen

    Viewing Snapshots and Movies on a TV Screen Use the AV cable that comes with the camera to connect it to the TV. Yellow Video Audio AUDIO IN jack (white) VIDEO IN jack (yellow) • Make sure that you insert the cable connector into the USB/AV port until you feel it click securely into place.
  • Page 94 Press [p] (PLAY) to turn on the camera. This will cause an image to appear on the TV screen, without anything appearing on the camera’s monitor screen. • Pressing [ON/OFF] or [r] (REC) will not turn on the camera while the AV cable is connected.

  • Page 95: Other Playback Functions (Play)

    Other Playback Functions (PLAY) This section explains menu items that you can use to configure settings and perform other playback operations. For information about menu operations, see page 76. Playing a Slideshow on the Camera (Slideshow) Procedure [p] (PLAY) * [MENU] * PLAY Tab * Slideshow Start Starts the slideshow Specifies the type of images to be included in the slideshow...

  • Page 96: Creating A Snapshot Of Movie Frames

    • To stop the slideshow, press [SET] or [MENU]. Pressing [MENU] stops the slideshow and returns to the menu screen. • Adjust audio volume by pressing [8] or [2] during playback. • All button operations are disabled while the slideshow is transitioning from one image to another.

  • Page 97: Editing A Movie On The Camera

    Editing a Movie on the Camera (Movie Editing) Procedure [p] (PLAY) * Movie Screen of Movie to be Edited * [MENU] * PLAY Tab * Movie Editing The Movie Editing feature lets you use one of the following procedures to edit out a specific part of a movie.
  • Page 98 When the frame where you want the cut point to be is displayed, press [2]. (To-Point Cut) (Point-To-Point Cut) ¡ (From-Point Cut) Use [8] and [2] to select “Yes” and then press [SET]. The selected cut operation will take considerable time to complete. Don’t try to perform any camera operation until the “Busy...

  • Page 99: Adjusting White Balance

    Adjusting White Balance (White Balance) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * White Balance You can use the white balance setting to select a light source type for a recorded image, which will affect the colors of the image. Daylight Outdoors, fair weather ¤...

  • Page 100: Adjusting The Brightness Of An Existing Snapshot

    Adjusting the Brightness of an Existing Snapshot (Brightness) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Brightness You can select one of five brightness levels, from +2 (brightest) to –2 (least bright). NOTE • The original snapshot is retained in memory and not deleted. •...

  • Page 101: Protecting A File Against Deletion

    Protecting a File Against Deletion (Protect) Procedure [p] (PLAY) * [MENU] * PLAY Tab * Protect Protects specific files. Use [4] and [6] to scroll through the files until the one you want to protect is displayed. Use [8] and [2] to select “On” and then press [SET].

  • Page 102: Rotating An Image

    Rotating an Image (Rotation) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Rotation Use [8] and [2] to select “Rotation” and then press [SET]. Each press of [SET] will rotate the displayed image 90 degrees left. When the displayed image is at the orientation you want, press [MENU].

  • Page 103: Cropping A Snapshot

    Cropping a Snapshot (Trimming) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Trimming You can crop a snapshot to trim parts you do not need, and save the result in a separate file. The original snapshot is also retained.

  • Page 104: Dividing Up A Continuous Shutter Group

    Dividing Up a Continuous Shutter Group (Divide Group) Procedure [p] (PLAY) * [MENU] * PLAY Tab * Divide Group See page 90 for details. Copying a Continuous Shutter Group (Select Frame) Procedure [p] (PLAY) * [MENU] * PLAY Tab * Select Frame See page 91 for details.

  • Page 105: Printing

    Printing Printing Snapshots Professional Print Service You can take a memory card that contains the images you want to print to a professional print service and have them printed. Printing on a Home Printer Printing Images on a Printer with Memory Card Slot You can use a printer equipped with a memory card slot to print images directly from a memory card.

  • Page 106: Connecting Directly To A Pictbridge Compatible Printer

    Connecting Directly to a PictBridge Compatible Printer You can connect the camera directly to a printer that supports PictBridge and print images without going through a computer. . To set up the camera before connecting to a printer Turn on the camera and press [MENU]. On the “Set Up”...
  • Page 107 . To print Turn on the printer and load paper. Turn on the camera. This will display the print menu screen. Use [8] and [2] to select “Paper Size”, and then press [6]. Use [8] and [2] to select a paper size and then press [SET]. •...

  • Page 108: Using Dpof To Specify Images To Be Printed And The Number Of Copies

    Using DPOF to Specify Images to be Printed and the Number of Copies . Digital Print Order Format (DPOF) DPOF is a standard that allows you to include image type, number of copy, and time stamp on/off information on the memory card with the images. After configuring settings, you can use the memory card to print on a home printer that supports DPOF or take the memory card to a professional print service.
  • Page 109 . Configuring the Same DPOF Settings for All the Images Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * DPOF Printing * All images Use [8] and [2] to specify the number of copies. You can specify a value up to 99. Specify 00 if you do not want to print the image. •...

  • Page 110: Date Stamping

    . Date Stamping You can use one of the following three methods to include the recording date in the printout of an image. Configure DPOF settings (page 108). You can turn date stamping on and off each time you print. You can configure settings so some images include the date stamp and some don’t.

  • Page 111: Using The Camera With A Computer

    Using the Camera with a Computer Things you can do using a computer... You can perform the operations described below while the camera is connected to a computer. Save images to a computer and view them there Playback and edit movies The procedures you need to perform when using the camera with your computer and when using the bundled software are different for Windows and the Macintosh.

  • Page 112: Using The Camera With A Windows Computer

    Use the Windows Media Player application that is installed with Windows for playback. – • Use commercial software as required. YouTube Uploader for CASIO Adobe Reader 8 (Not required if already installed.) Using the Camera with a Computer page: –...

  • Page 113: Viewing And Storing Images On A Computer

    . Computer System Requirements for Bundled Software Computer system requirements are different for each of the applications. See the “Read me” file that comes with each application for details. Information about computer system requirements also can be found under “Computer System Requirements for Bundled Software”...
  • Page 114 Turn off the camera and then use the USB cable that comes with the camera to connect it to your computer. USB port Large connector • The camera does not draw power over the USB cable. Check the battery level before connecting and make sure it is not too low.

  • Page 115: To View Images You Copied To Your Computer

    After you finish copying images, disconnect the camera from the computer. Windows Vista, Windows XP On the camera, press [ON/OFF] to turn off the camera. After making sure that the back lamp is unlit, disconnect the camera from the computer. Windows 2000 Click card services in the task tray on your computer screen, and disable the drive number assigned to the camera.

  • Page 116: Playing Movies

    TV or computer and play back movies that way. Uploading Movie Files to YouTube Installing YouTube Uploader for CASIO from the CD-ROM that comes with your camera simplifies uploading of movie files you recorded with the YouTube mode to YouTube.
  • Page 117 Uploader for CASIO. . To upload a movie file to YouTube • Before you can use YouTube Uploader for CASIO, you need to go to the YouTube website (http://www.youtube.com/) and register as a user there. • Do not upload any video that is copyrighted (including neighboring copyrights) unless you yourself own the copyright or you have obtained the permission of the applicable copyright holder(s).

  • Page 118: Viewing User Documentation

    On the menu screen, click the “Language” down arrow button and then select the language you want. Click “Manual” to select it and then click “Digital Camera”. IMPORTANT! • You must have Adobe Reader or Adobe Acrobat Reader installed on your computer in order to view the contents of a PDF file.

  • Page 119: Using The Camera With A Macintosh

    Using the Camera with a Macintosh Install the required software in accordance with what version of the Macintosh OS you are running and what you want to do. When you want to do this: Save images to your Macintosh and view them there manually Save images to your Macintosh...
  • Page 120 Turn off the camera and then use the USB cable that comes with the camera to connect it to your Macintosh. USB port Large connector • The camera does not draw power over the USB cable. Check the battery level before connecting and make sure it is not too low.

  • Page 121: Transferring Images Automatically And Managing Them

    After the copy operation is complete, drag the drive icon to Trash. On the camera, press [ON/OFF] to turn off the camera. After making sure that the green back lamp is unlit, disconnect the camera from the computer. . To view copied images Double-click the camera’s drive icon.

  • Page 122: Viewing User Documentation

    Open the file named “camera_xx.pdf”. • “xx” is the language code (Example: camera_e.pdf is for English.) User Registration Internet registration only is supported. Visit the following CASIO website to register: http://world.casio.com/qv/register/ Using the Camera with a Computer...

  • Page 123: Files And Folders

    Files and Folders The camera creates a file and saves it each time you shoot a snapshot, record a movie, or perform any other operation that stores data. Files are grouped by storing them in folders. Each file and folder has its own unique name. •...

  • Page 124: Memory Card Data

    Memory Card Data The camera stores images you shoot in accordance with the Design Rule for Camera File System (DCF). . About DCF DCF is a standard that makes it possible to view and print images recorded on one manufacturer’s camera on DCF-compliant devices produced by other manufacturers. You can transfer DCF-compliant images recorded with another camera to this camera and view them on this camera’s monitor screen.

  • Page 125: Supported Image Files

    . Supported Image Files • Image files shot with this camera • DCF-compliant image files This camera may not be able to display an image, even if it is DCF-compliant. When displaying an image recorded on another camera, it may take a long time for the image to appear on this camera’s monitor screen.

  • Page 126: Other Settings (Set Up)

    Other Settings (Set Up) This section explains menu items that you can use to configure settings and perform other operations in both the REC mode and PLAY mode. For information about menu operations, see page 76. Adjusting Monitor Screen Brightness (Screen) Procedure [MENU] * Set Up Tab * Screen With this setting, the camera detects available light levels and...

  • Page 127: Configuring Camera Sound Settings

    Configuring Camera Sound Settings (Sounds) Procedure [MENU] * Set Up Tab * Sounds Startup Specifies the startup sound Half Shutter Sound 1 - 5: Built-in sounds (1 through 5) Shutter Off: Sound off Operation Specifies the sound volume. This setting is also used as the Operation audio level during video output (page 133).

  • Page 128: Configuring World Time Settings

    Configuring World Time Settings (World Time) Procedure [MENU] * Set Up Tab * World Time You can use the World Time screen to view the current time in a zone that is different from your Home City when you go on a trip, etc. World Time displays the current time in 162 cities in 32 time zones around the globe.
  • Page 129 Time Stamping Snapshots (Timestamp) Procedure [MENU] * Set Up Tab * Timestamp You can configure the camera to stamp the recording date only, or date and time in the lower right corner of each snapshot. • Once date and time information is stamped into a snapshot, it cannot be edited or deleted.

  • Page 130: Specifying The Display Language

    Specifying the Date Style (Date Style) Procedure [MENU] * Set Up Tab * Date Style You can select from among three different styles for the date. Example: December 19, 2009 YY/MM/DD 09/12/19 DD/MM/YY 19/12/09 MM/DD/YY 12/19/09 • This setting also affects the control panel date format as shown below (page 28). YY/MM/DD or MM/DD/YY: MM/DD DD/MM/YY: DD/MM Specifying the Display Language (Language)

  • Page 131: Configuring Sleep State Settings

    Configuring Sleep State Settings (Sleep) Procedure [MENU] * Set Up Tab * Sleep This feature turns off the monitor screen whenever no camera operation is performed for a preset amount of time. Press any button to turn the monitor screen back on. Trigger Time Settings: 30 sec, 1 min, 2 min, Off (Sleep is disabled while “Off”...

  • Page 132: Configuring [R] And [P] Settings

    Configuring [r] and [p] Settings (REC/PLAY) Procedure [MENU] * Set Up Tab * REC/PLAY Camera turns on whenever [ Power On pressed. Camera turns on or off whenever [ Power On/Off is pressed. Camera does not turn on or off whenever [ Disable (PLAY) is pressed.

  • Page 133: Configuring Usb Protocol Settings

    Configuring USB Protocol Settings (USB) Procedure [MENU] * Set Up Tab * USB You can use the procedure below to select the USB communication protocol, which is used when exchanging data with a computer, printer, or other external device. Select this setting when connecting to a computer (pages 113, 119).

  • Page 134: Specifying The Battery Type

    Specifying the Battery Type (Battery Type) Procedure [MENU] * Set Up Tab * Battery Type See page 15 for details. Configuring a Startup Image (Startup) Procedure [MENU] * Set Up Tab * Startup Display the image you want to use as your startup image and then select “On”. •...

  • Page 135: Formatting Built-In Memory Or A Memory Card

    Formatting Built-in Memory or a Memory Card (Format) Procedure [MENU] * Set Up Tab * Format If a memory card is loaded in the camera, this operation will format the memory card. It will format built-in memory if no memory card is loaded. •...

  • Page 136: Configuring Monitor Screen Settings

    Configuring Monitor Screen Settings Turning Display Information On and Off (Info) Each press of [DISP] will cycle through display settings that display or hide on-screen information and the control panel. You can configure separate settings for the REC mode and PLAY mode. Information on, Displays setting information and the control panel.

  • Page 137: Using The On-Screen Histogram To Check Exposure

    Using the On-screen Histogram to Check Exposure (+Histogram) Displays a histogram on the monitor screen which you can use to check the exposure of an image before you shoot it. You also can display the histogram in the PLAY mode for information about the exposure levels of images.

  • Page 138: How To Use The Histogram

    How to Use the Histogram A histogram is a graph that represents the lightness of an image in terms of the number of pixels. The vertical axis indicates the number of pixels, while the horizontal axis indicates lightness. If the histogram appears too lopsided for some reason, you can use EV shift to move it left or right in order to achieve better balance.

  • Page 139: Appendix

    Appendix Precautions during Use . Avoid Use While In Motion • Never use the camera to record or play back images while operating an automobile or other vehicle, or while walking. Looking at the monitor while in motion creates the risk of serious accident. .
  • Page 140 • Never try to take the camera apart or modify it in any way. Doing so creates the risk of electric shock, burn injury, and other personal injury. Be sure to leave all internal inspection, maintenance, and repair up to your dealer or nearest CASIO authorized service center.
  • Page 141 . Locations To Be Avoided • Never leave the camera in any of the following types of locations. Doing so creates the risk of fire and electric shock. – Areas subject to large amounts of humidity or dust – Food preparation areas or other locations where oil smoke is present –...

  • Page 142: Alkaline Batteries

    . Alkaline Batteries • Should liquid from an alkaline battery ever get into your eyes, take the following steps. 1. Immediately rinse your eyes with clean water. Do not rub! 2. See a physician as soon as possible. Failure to clean alkaline battery fluid from the eyes creates the risk of loss of sight. .

  • Page 143: Battery Life

    Use of rechargeable Ni-MH batteries is recommended. . Data Error Precautions Your digital camera is manufactured using precision digital components. Any of the following creates the risk of corruption of data in camera memory and camera malfunction.

  • Page 144: Caring For Your Camera

    . Condensation Sudden and extreme temperature changes, such as when the camera is moved from the outdoors on a cold winter day into a warm room, can cause water droplets called “condensation” to form on the interior and the exterior of the camera, which creates the risk of malfunction.
  • Page 145 Note that CASIO COMPUTER CO., LTD. shall not be held liable for use of this product in any way that infringes on the copyrights of others or that violates copyright laws.

  • Page 146: Power Supply

    Any and all unauthorized commercial copying, distribution, and copying of the bundled software over a network are prohibited. This product contains PrKERNELv4 Real-time OS of eSOL Co., Ltd. Copyright 2007 eSOL Co., Ltd. © PrKERNELv4 is a registered trademark of eSOL Co., Ltd. in Japan.

  • Page 147: Storage Precautions

    . Storage Precautions • Always remove the batteries from the camera when you are not using it. Leaving batteries in the camera can cause it to discharge and go dead, which will lead to malfunction of the camera. • Remove batteries from the camera if you do not plan to use it for about two weeks or more.
  • Page 148 . Alkaline Battery Life The actual life of alkaline batteries is affected by a variety of factors, including the battery manufacturer, the amount of time the batteries spend in storage before you use them, temperature while you are recording, and photographic conditions. As a rule, we recommend the use of rechargeable Ni-MH batteries, which have longer lives than alkaline batteries.

  • Page 149: Using Rechargeable Batteries

    . Using Rechargeable Batteries In the case of rechargeable batteries, use of one of the rechargeable Ni-MH (nickel metal hydride) batteries (HR6) listed below is recommended. • SANYO eneloop (SANYO Electric Co., Ltd.) • DURACELL RECHARGEABLE (DURACELL, div of P&G Inc.) •...

  • Page 150: Using Household Power

    Using Household Power You need to purchase the optionally available AC adaptor (AD-C100) in order to be able to power the camera using a household power supply. Connect the power cord to the AC adaptor. Open the camera’s terminal cover and connect the AC adaptor to the terminal marked [ Plug the power cord into a power outlet.

  • Page 151: Using A Memory Card

    . Precautions when Using the AC Adaptor • Connecting the AC adaptor to the camera does not charge the batteries. • Make sure that the camera is turned off before connecting or disconnecting the AC adaptor. • If you are connecting the AC adaptor to the camera while it has batteries loaded, never connect or disconnect the AC adaptor while the camera is turned on.
  • Page 152 . Using a Memory Card • SD memory cards and SDHC memory cards have a write protect switch. Use the switch when you need to guard against accidentally deleting data. Note, however, if you write protect an SD memory card you must then turn write protection off whenever you want to record to it, format it, or delete any of its images.

  • Page 153: Computer System Requirements For Bundled Software

    Hard Disk Drive Space : At least 180MB Other : Internet Explorer 6.0 or higher installed For details about the minimum system requirements for each software application, see the “Read me” files on the CASIO Digital Camera Software CD-ROM that comes bundled with the camera. Appendix...

  • Page 154: General Guide

    General Guide The numbers in parentheses indicate the pages where each item is explained. . Camera Front Shutter button (page 20) [ON/OFF] (Power) (page 19) Front lamp (pages 78, 79) Mode dial (pages 20, 27) Speaker Microphone (page 57) Flash (page 35) Strap ring (page 11) ð...
  • Page 155 Bottom Battery compartment (pages 12, 146) Tripod hole Use this hole when attaching to a tripod. Lock (page 12) Battery cover (pages 12, 146) Appendix...

  • Page 156: Monitor Screen Contents

    Monitor Screen Contents The monitor screen uses various indicators, icons, and values to keep you informed of the camera’s status. • The sample screens in this section are intended to show you the locations of all the indicators and figures that can appear on the monitor screen in various modes. They do not represent screens that actually appear on the camera.

  • Page 157: Movie Recording

    . Movie Recording . Snapshot Viewing Recording mode (page 56) Record: Off (page 63) Remaining movie memory capacity (page 169) Movie quality (HD/STD movie) (pages 56, 59)/ Recording speed (high speed movie) (pege 59) Current movie fps indicator Optical zoom (page 63) Prerecord Movie (page 61) YouTube (page 62) File type...

  • Page 158: Movie Playback

    . Movie Playback 1 2 3 . CS Image Viewing File type Protect indicator (page 101) Folder name/file name (page 123) Movie recording time (page 88) Movie Quality/Speed (pages 56, 59) Prerecord (Movie) (page 61) YouTube (page 62) Date/time (page 130) Battery level indicator (page 14) Current image number/number of images in the group (page 89)

  • Page 159: Reset Initial Default Settings

    Reset Initial Default Settings The tables in this section show the initial default settings that are configured for menu items (displayed when you press [MENU]) after you reset the camera (page 135). Menu items depend on whether the camera is in the REC mode or PLAY mode. •...

  • Page 160: Play Mode

    “Set Up” Tab Screen Auto 2 Brightness Startup: Sound 1 / Half Shutter: Sound 1 / Shutter: Sound 1 / Sounds Operation: Sound 1 / = Operation: ...//// / = Play: ...//// File No. Continue World Time Home Timestamp Adjust –...

  • Page 161: When Things Don't Go Right

    When things don’t go right... Troubleshooting Problem Possible Cause and Recommended Action Power Supply Power does not 1)The batteries may not be loaded correctly (page 12). turn on. 2)The batteries may be dead. The camera 1)Auto Power Off may have activated (page 131). Turn power suddenly powers back on.
  • Page 162 Problem Possible Cause and Recommended Action The flash does not 1)If ? (Flash Off) is selected as the flash mode, change to fire. another mode (page 35). 2)If battery power is load, replace them with a full set of new ones.
  • Page 163 Images are not This camera cannot display non-DCF images recorded onto a displayed. memory card using another digital camera. Images cannot be Note that you cannot edit the following types of snapshots. edited (with • Snapshots created using MOTION PRINT resizing, trimming, •...
  • Page 164 If the same message appears after you turn power back on, contact your retailer or a CASIO authorized service center. The lens-barrel unit A lubricating agent is used to ensure that the lens operates is dirty or looks smoothly.

  • Page 165: Display Messages

    Display Messages The camera’s protection function may have activated because camera temperature is too high. Turn off the ALERT camera and wait until it cools down before trying to use it again. Battery is low. Battery power is low. Move Out CS or Move In CS framing could not be Camera not in performed for some reason, and so the camera cannot go standby.
  • Page 166 If the same LENS ERROR message appears after you turn power back on, contact a CASIO authorized service center or your original retailer. The Anti Shake unit of the camera may be malfunctioning. LENS ERROR 2 If the same message appears after you turn power back on, contact your retailer or a CASIO service center.
  • Page 167 This file cannot be The file you are trying to access is corrupted or is a type played. that cannot be displayed by this camera. • You attempted to copy images from built-in memory to a This function cannot be used. •...

  • Page 168: Number Of Snapshots And Movie Recording Time

    Number of Snapshots and Movie Recording Time Snapshot Image Size Image (Pixels) Quality RAW+ Fine (9M: 3456 2592) Normal Economy Fine (3456 2592) Normal Economy Fine (3456 2304) Normal Economy 16:9 Fine (3456 1944) Normal Economy Fine (3264 2448) Normal Economy Fine (3072...
  • Page 169 Movies Image Quality Movie (Pixels) / Mode (Audio) 1280 (Monaural) 1280 (No audio) HD/STD (Monaural) (No audio) 210 fps (No audio) 420 fps (No audio) 1000 fps (1000 frames/second) (No audio) 30-210 fps (No audio) Built-in Approximate Data Memory Movie Rate (Frame Rate) Recording Capacity...
  • Page 170 Movie Image Quality Mode (Pixels) / (Audio) YouTube (HS210 fps) 360 (No audio) YouTube (HS420 fps) 168 (No audio) YouTube (HS1000 fps) 80 (No audio) YouTube Capture YouTube Mode (HS30-210 fps) 360 (No audio) YouTube (STD) 480 (Monaural) YouTube (STD) 480 (No audio) •...

  • Page 171: Specifications

    Specifications File Format Snapshots: RAW (DNG), JPEG (Exif Version 2.2); DCF 1.0 * DNG file format is one type of RAW image file, and it is Movies: Motion JPEG AVI, IMA-ADPCM audio (monaural) Recording Media Built-in Memory (Image Storage Area: 31.9MB) SD/SDHC/MMC/MMCplus Recorded Image Sizes Snapshot: RAW, 9M (3456 Movies: HD (1280...
  • Page 172 Exposure –2.0 EV to +2.0 EV (in 1/3EV steps) Compensation Shutter CMOS electronic shutter, mechanical shutter Shutter Speed Snapshot (Auto): 1 to 1/2000 second Snapshot (Aperture Priority AE): 1 to 1/2000 second Snapshot (Shutter Speed Priority AE): 30 to 1/2000 second Snapshot (Manual Exposure): 30 to 1/2000 second * May differ due to the camera setup.
  • Page 173 World Time 162 cities in 32 time zones City name, date, time, summer time Input/Output USB/AV port, Hi-Speed USB compatible Terminals AC adaptor connector (DC-IN) Microphone Monaural Speaker Monaural Power Requirements AA-size alkaline battery AA-size rechargeable Ni-MH battery AC adaptor (AD-C100) (optional accessory) Appendix...
  • Page 174 Approximate Battery Life All of the values provided below represent the approximate amount of time under normal temperature (23°C (73°F)) before the camera turns off. These values are not guaranteed. Low temperatures shorten battery life. Operation ALKALINE BATTERY LR6 Panasonic DURACELL ULTRA RECHARGEABLE Ni-MH BATTERY...
  • Page 175 Approximate number of shots (CIPA) (Operating Time) In accordance with CIPA standards Normal temperature (23°C (73°F)), monitor on, zoom operation between full wide and full telephoto every 30 seconds, during which two images are shot with flash; power turned off and back on every time 10 images are shot. Approximate playback time Standard temperature (23°C (73°F)), one-image scroll approximately every 10 seconds •...
  • Page 176 CASIO COMPUTER CO.,LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan MA0810-B...

This manual is also suitable for:

Exilim k1160pcm2dmx

Table of Contents