Accessing The System Board Components And Drives - Lenovo 7360D6U - THINKCENTRE M58 7360 Hardware Maintenance Manual

Accessing the system board components and drives

Attention
Do not open your computer or attempt any repair before reading and understanding the "Important safety information"
in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre
Safety and Warranty Guide, go to:
http://www.lenovo.com/support
This section provides instructions on how to access the system board components and drives.
To access the system board components and drives:
1. Open the computer cover. See "Opening the computer cover" on page 103.
2. On some models, you might need to pivot the drive bay assembly upward and remove the hard disk
drive to access the internal components. See "Replacing the hard disk drive" on page 118.
Note: Make sure you note the location of any cables that you disconnect from the drives or the system
board.
Attention: If your computer has an internal hard disk drive, you must return the hard disk drive to the
latched position before closing the computer cover to prevent damage to the hard disk drive.
Figure 40. Pivoting the drive bay assembly
104
ThinkCentre Hardware Maintenance Manual