Replacing The Power Supply - Lenovo 7360D6U - THINKCENTRE M58 7360 Hardware Maintenance Manual

Hardware maintenance manual
Table of Contents

Advertisement

6. Go to "Completing the FRU replacement" on page 127.

Replacing the power supply

Attention
Do not open your computer or attempt any repair before reading and understanding the "Important safety information"
in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre
Safety and Warranty Guide, go to:
http://www.lenovo.com/support
This section provides instructions on how to replace the power supply.
Attention
Never remove the cover on a power supply or any part that has the following label attached.
Hazardous voltage, current, and energy levels are present inside any component that has this label attached.
There are no serviceable parts inside these components.
To replace the power supply:
1. Remove the four screws at the rear of the chassis that secure the power supply.
Figure 49. Power-supply-retaining screws
2. Open the computer cover. See "Opening the computer cover" on page 103.
3. Pivot the drive bay assembly upward to gain access to the power supply.
4. Locate the power supply. See "Locating components" on page 105.
.
Chapter 9
Replacing FRUs (Machine Types: 3379, 4083, 4088, 4099, 4138, 5897, 6137, 6234, 6258, 6303, 7174, 7220,
7346, 7354, 7357, 7360, 7483, 7582, 7627, 7630, 7638, 8910, and 9964.)
111

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents