Lenovo 7360D6U - THINKCENTRE M58 7360 Hardware Maintenance Manual page 136

Important
Correctly route all power supply cables to avoid interference with the drive bay assembly. Keep cables
clear of the hinges and sides of the computer chassis.
Figure 67. Cable routing
3. Lower the drive bay assembly and position the drive locks to the locked position. Otherwise, you
cannot close the computer cover.
4. Close the computer cover.
5. If a cover lock is installed, lock the cover.
6. Reconnect the external cables and power cords to the computer. See "Locating connectors on the
rear of the computer" on page 102.
7. To update your configuration, see Chapter 6 "Using the Setup Utility" on page 39.
128
ThinkCentre Hardware Maintenance Manual