Cabletron Systems MMAC-Plus 9F310-02 Appendix

Local management module specific appendix

Hide thumbs Also See for MMAC-Plus 9F310-02:

Need help?

Do you have a question about the MMAC-Plus 9F310-02 and is the answer not in the manual?

Page 1 MMAC-Plus ™ Module Local Management 9F310-02 and 9F315-02 Module Specific Appendix 9031401...
Page 2 Appendix 9F310-02 and 9F315-02 Module Speciﬁc Information Introduction This appendix contains local management information that is speciﬁc to the 9F310-02 and 9F315-02 FDDI Switch Modules. Default Interface Codes The Default Interface ﬁeld on the General Conﬁguration Screen, Figure 3-3, allows you to enter a number (1 through 5).
Page 3 9F310-02 and 9F315-02 Module Speciﬁc Information FNB Resource Conﬁguration Codes The 9F310-02 and 9F315-02 FDDI Switch Modules is capable of bridging/switching any three, of ﬁve possible interfaces, depending on the way you conﬁgure the module. The module’s INB connection is ﬁxed (not user-conﬁgured). The FNB Resource Conﬁguration Screen allows you to connect both front panel ports, both FNB ports, or one front panel and one FNB port to the bridge/switch.
Page 4 Appendix Table 2. 9F310-02 and 9F315-02 FDDI Switch Modules FNB Resource Conﬁguration Codes Conﬁguration FDDI Description Connections FNB1 <-> FNB2 The two FDDI Networks on the backplane (FNB-1 and FNB-2) are connected to the same bridge/switch. FNB1 <-> FRONT2 The FNB-1 on the backplane and the FDDI-2 port on the module’s front panel are connected to the same bridge/switch.

Mmac-plus 9f315-02