Fnb Resource Configuration Codes - Cabletron Systems MMAC-Plus 9F310-02 Appendix

Local management module specific appendix

Hide thumbs Also See for MMAC-Plus 9F310-02:

Table of Contents

9F310-02 and 9F315-02 Module Speciﬁc Information

FNB Resource Conﬁguration Codes

The 9F310-02 and 9F315-02 FDDI Switch Modules is capable of bridging/switching

any three, of ﬁve possible interfaces, depending on the way you conﬁgure the

module. The module's INB connection is ﬁxed (not user-conﬁgured).

The FNB Resource Conﬁguration Screen allows you to connect both front panel ports,

both FNB ports, or one front panel and one FNB port to the bridge/switch.

Redirecting one or both of the module's front panel FDDI interfaces to the FNB

backplane creates an INB to FNB bridge/switch product that allows migration from

FNB modules to INB modules.

The FNB Resource Conﬁguration Screen lists all the possible connections that the

9F310-02 and 9F315-02 FDDI Switch Modules can support on the FNB, displays the

current connection, and allows you to change the connection. Table 2 lists and

describes the FDDI connections from which you can select.

Table of Contents

Need help?

Do you have a question about the MMAC-Plus 9F310-02 and is the answer not in the manual?

Mmac-plus 9f315-02