Edimax i-Watcher i-Watcher Pan/Tilt Internet IP Camera User Manual page 43

Pan/tilt internet ip camera

Table of Contents

i-WATCHER Installation Method 8:

Internet Access Mode:

Real IP Address:

IP Sharing or LAN Hub:

i-WATCHER Network Setup:

User:

Public IP of the IP sharing switch have to set to a Static IP address (e.g.:

230.80.86.01), allocate another Private IP address, enable the DHCP function of the

IP sharing Hub

In each i-WATCHER IP address settings, assign with different virtual IP, as well as

different port numbers for the Http Port setting.

For the setting of the Port switching of the IP sharing switch, please refer to the

i-WATCHER's IP address and the Port sequence synchronization setting.

For remote viewing of i-WATCHER: launch IE browser and enter the IP address of the

IP Sharing switch and the Port Number of the IP-Cam, e.g.: http://230.80.86.01:81

Leased Line ADSL or Cable Modem

1 Static IP address required

Enable DHCP and NAT function

LAN Enable (Manually)

Web Server Port Number (Setting required)

1 Static IP address and multiple i-WATCHER s

installed to the multiple IP sharing switch

Table of Contents

Need help?

Do you have a question about the i-Watcher i-Watcher Pan/Tilt Internet IP Camera and is the answer not in the manual?

I-watcher