Edimax i-Watcher i-Watcher Pan/Tilt Internet IP Camera User Manual page 37

Pan/tilt internet ip camera

Table of Contents

i-WATCHER Installation Method 2:

Internet Access Mode:

Leased Line, ADSL or Cable Modem

Real IP Address:

1 Static IP address required

IP Sharing or LAN Hub:

Enabled with DHCP function

LAN Enable (Manually)

i-WATCHER Network Setup:

Web Server Port Number (Setting required)

1 Static IP address and multiple i-WATCHER

User:

connected to the IP sharing switch or LAN Hub

Public IP of the IP sharing switch have to set to a Static IP address (e.g.: 230.80.86.01),

allocate another Private IP address, enable the DHCP function of the IP sharing Hub

In each i-WATCHER IP address settings, assign each with different virtual IP, as well as

different port number for the HTTP Port setting.

For the setting of the Port switching of the IP sharing switch, please refer to the

i-WATCHER's IP address and the Port sequence synchronization setting.

For remote viewing of i-WATCHER: launch IE browser and enter the IP address of the

IP Sharing switch and the Port Number of the IP-Cam, e.g.: http://230.80.86.01:81

Table of Contents

Need help?

Do you have a question about the i-Watcher i-Watcher Pan/Tilt Internet IP Camera and is the answer not in the manual?

I-watcher