Setting Basic Ip Options - NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Reference Manual

NETGEAR ProSafe 802.11g Wireless Access Point WG302 Reference Manual
3. The login screen will display. Enter the default user name of admin and default password of
password to log in.
Figure 2-6.
4. Click Login now.
Once you have entered your access point name, your Web browser will automatically locate
the ProSafe 802.11g and display the home page screen, as shown in

Setting Basic IP Options

The basic settings for your wireless access point are entered on this screen. With the exception of
selecting the correct Country/Region, most of the other default settings will work in most cases.
However, if your wireless access point is part of a more complex LAN network, then modify your
settings to meet the requirements of your network based on the explanation of the various fields.
To configure the basic settings of your wireless access point:
1. Click Basic Settings under Setup in the main menu. The Basic Settings menu will appear as
shown below:
Basic Installation and Configuration
v4.0, April 2006
Figure 2-2 on page 2-5.
2-9