Restricting Wireless Access By Mac Address - NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Reference Manual

NETGEAR ProSafe 802.11g Wireless Access Point WG302 Reference Manual
.
Figure 2-18.
2. Enter the WPA Passphrase (Network Key).
3. Wireless Client Security Separation is disabled by default. If enabled, associated wireless
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations.
4. Click Apply to save your settings.

Restricting Wireless Access by MAC Address

The optional Access Control window lets you block the network access privilege of any specified
stations through the WG302 Wireless Access Point. This provides an additional layer of security.
To restrict access based on MAC addresses:
1. Log in to the WG302 using the default address of http://192.168.0.228, user name of admin
and default password of password, or whatever LAN address and password you have set up.
2. Under Security on the main menu, select Access Control. The Access Control screen will
display.
3. Check the Turn Access Control On radio box.
Basic Installation and Configuration
v4.0, April 2006
2-31