Grouping Faders; Listening To Groups - Yamaha Programmable Mixer 01 User Manual

56
Chapter 6: Groups and Pairs
1. Press [GROUP].
The GROUP LCD function
appears.
2. Use the [ π ] [ † ] cursor but-
tons to select groups.
3. Use the [SEL] buttons to add
and remove channels to
and from groups.
Stereo-pair channels are
added and removed together.
4. To adjust an individual fader
in a group, press [ENTER] to
turn BAL ADJ ON, adjust the
fader, then press [ENTER]
again.
All faders move when one
fader in a group is adjusted.
!
The quickest way to select
groups is to repeatedly press the
[GROUP] button.
ProMix 01 User's Guide

Grouping Faders

Faders can be grouped for multiple fader control using one fader. This
makes it easy to control several faders simultaneously. The input
channel and stereo input channel faders can be used in groups. There
are four groups available: A, B, C, and D.
Note: Only faders feeding the stereo bus are grouped. When faders are
used to adjust channel-to-send levels, grouping is not active.
Shown below is the FADER GROUP LCD function. Channel num-
bers are listed along the top, and group letters to the left side. The
selected group is highlighted and its name is shown at the bottom of
the display. A dot appears when a channel is added to a group and dis-
appears when it is removed.
Move only one fader in a group at a time. If you try to adjust more,
the first one adjusted should have priority, but you may upset their
relative positions.
You can temporarily disable a group to make adjusts to individual
faders using the Balance Adjust function. When disabled (i.e. the Bal-
ance Adjust function is ON), the [SEL] buttons of the channels in the
group flash.

Listening to Groups

When the GROUP LCD function is selected, you can listen to a
post-fader mix of all channels in the selected group via CUE. This
makes it easy to balance faders in a group. It works only when the CUE
mode is set to MIX or LAST CUE, not when it's set to ST FIX. When
another LCD function is selected, CUE returns to normal operation.