Returning The Processed Signal - Yamaha Programmable Mixer 01 User Manual

33

Returning the Processed Signal

Returning the Processed Signal
Returning the processed signal via RTN1 or RTN2 is the second step
to using effects. As explained in the "Sending a Channel Signal" pro-
cedure on page 32, the processed signal can be returned into the mix
just by raising the RTN/SEND fader. However, RTN1 and RTN2 also
feature the following functions.
Meters — See "Sending a Channel Signal" on page 32.
Faders — these are used to set the level of processed signal that is fed
into the mix. When the SEND1 LCD function is selected, the
RTN/SEND fader is automatically set to RTN1. Likewise, when the
SEND2 LCD function is selected, it is automatically set to RTN2. The
RTN/SEND [SEL] button can also be used to select RTN1 and RTN2.
EQ — RTN1 and RTN2 feature the same three-band parametric EQ
as that of the input channels. The EQ Library can also be used. See
"EQ" on page 21 and "EQ Library" on page 22.
CUE — RTN1 and RTN2 signals can be monitored in stereo
(pre-ON/OFF switch) using CUE. See "CUE" on page 49 for more
details.
ON/OFF — RTN1 and RTN2 signals can be turned ON and OFF
using the RTN/SEND [ON] button. When the SEND1 LCD function
is selected, the RTN/SEND [ON] button is automatically set to RTN1.
Likewise, when the SEND2 LCD function is selected, it is automati-
cally set to RTN2. The RTN/SEND [SEL] button can also be used to
select RTN1 and RTN2. See "ON Buttons" on page 25 for more
details.
Pan — RTN1 and RTN2 pan controls appear on the PAN LCD func-
tion. See "Pan and Balance" on page 26 for more details.
ProMix 01 User's Guide