Yamaha Programmable Mixer 01 User Manual page 48

40
Chapter 4: Auxiliaries and Effects
Program 13—FLANGE->REVERB
Stereo flange followed by reverb.
Parameter Setting
Mod.Freq 1.4Hz
Mod.Depth 22%
FB.Gain +45%
Mod.Dly 13.0ms
Rev.time 2.4s
Diffusion 8
Ini.Dly 26.0ms
LPF 4.5kHz
HPF 45Hz
Rev.Depth 30%
Program 14—DELAY L-C-R
A three-part delay with independent delay time parameters for left, right, and center.
Parameter Setting
Dly(L) 250.0ms
Dly(R) 500.0ms
Dly(C) 125.0ms
Level(C) 70
FB.Dly 500.0ms
FB.Gain +40%
High Ratio 0.8
Program 15—MONODLY->CHORUS
Mono delay followed by stereo chorus.
Parameter Setting
Delay 400.0ms
FB.Gain +32%
High Ratio 0.6
Mod.Freq 0.4Hz
Mod.Depth 10%
Mod.Dly 0.1ms
ProMix 01 User's Guide
Range Description
0.1–20.0Hz Flange modulation speed.
0–100% Flange modulation depth. The amount of modulation.
–99...+99% Feedback gain. The amount of processed signal fed back into the flanger.
0.0–15.5ms Flange modulation delay. The delay time before modulation starts.
0.3–30.0s Reverb time.
0–10 Reverb diffusion.
0.1–160.0ms Reverb initial delay between the direct sound and early reverb reflections.
1.0kHz–16.0kHz, THRU Reverb low pass filter cutoff frequency.
THRU, 32Hz–8kHz Reverb high pass filter cutoff frequency.
0–100% Reverb depth. The amount of reverb.
Range Description
0.1–661.0ms Left channel delay time.
0.1–661.0ms Right channel delay time.
0.1–661.0ms Center channel delay time.
0–100 Center delay volume level.
0.1–661.0ms Feedback delay. The delay time before feedback starts.
–99...+99% Feedback gain. The amount of delayed signal fed back into the delay.
0.1–1.0 Feedback high-frequency decay ratio.
Range Description
0.1–618.0ms Delay time.
–99...+99% Delay feedback gain. The amount of delayed signal fed back into the delay.
0.1–1.0 Delay feedback high-frequency decay ratio.
0.1–20.0Hz Chorus modulation speed.
0–100% Chorus modulation depth. The amount of modulation.
0.0–24.0ms Chorus modulation delay. The delay time before modulation starts.