Editing Effects Programs - Yamaha Programmable Mixer 01 User Manual

1. Press [SEND1] or [SEND2].
The SEND1 or SEND2 LCD
function appears. If you didn't
exit after your last effect edit,
the EFFECT EDIT LCD function
appears instead.
2. Select EDIT.
3. Press [ENTER].
The EFFECT EDIT LCD func-
tion appears.
4. Use the [π] [†] cursor but-
tons to select parameters
and the PARAMETER wheel
to set them.
You can go to another LCD
function and return to the
EFFECT EDIT LCD function at
any time.
5. When you've finished edit-
ing, select EXIT and press
[ENTER], or simply press
[ENTER] twice.
To name and store the pro-
gram, see "Storing Effects Pro-
grams" on page 36.

Editing Effects Programs

You can edit all effects programs, however, you can store only to user
effects locations. So if you edit a preset program, you must store it as
a user program.
A typical Edit display is shown below. The name and number of the
effects program are shown at the top, and the effects parameters are
shown in the center. The cursor buttons are used to scroll through the
parameters and the PARAMETER wheel is used to set them.
See "Preset Effects Program Parameters" on page 37 for a detailed list-
ing of effects parameters, their ranges, and preset settings.
Editing Effects Programs
ProMix 01 User's Guide
35