Lcd Functions - Yamaha Programmable Mixer 01 User Manual

LCD Functions

ProMix 01 functions without dedicated controls are organized into
LCD functions. They are selected using the function buttons to the
left of the LCD. The name of the selected LCD function appears in
the FUNCTION area of the display.
The following table lists all LCD functions and explains what they do.
LCD Function
Lists the utility functions: OSCILLATOR, SEND3, 4 CONFIGU-
UTILITY RATION, OUTPUT COMP PATCH POINT, MEMORY PROTECT,
and BATTERY CHECK.
Lists the MIDI functions: MIDI SETUP, PROGRAM CHANGE AS-
MIDI SIGN, CONTROL CHANGE ASSIGN, BULK DUMP/REQUEST,
LOCAL ON/OFF, and MEMORY CONTROL CHANGE OUT.
SCENE MEMORY Store and recall mix scenes.
GROUP Set up the four fader groups.
PAIR Set up channel pairs.
Meter CH1–16, ST IN, RTN1, RTN2, SEND3, and SEND4 levels.
METER
There are two displays.
PAN/ Set pan, balance, and phase. There are three displays.
COMP Store, recall, and edit COMP1, COMP2, COMP3.
CUE Set the CUE mode and display channel information.
SEND1 Store, recall, and edit effects programs for internal Effect 1.
SEND2 Store, recall, and edit effects programs for internal Effect 2.
SEND3 Set up SEND3.
SEND4 Set up SEND4.
This LCD function appears instead of SEND3 and SEND4 in
SEND3-4 SEND3-4 stereo mode. There are two displays. The second dis-
play contains the channel-to-SEND3-4 pan controls.
EQ Set the EQ.
LIBRARY Store and recall EQ programs.
LCD Functions
Description
ProMix 01 User's Guide
15