Data Types - Yamaha Programmable Mixer 01 User Manual

98
Appendix
ProMix 01 User's Guide

Data Types

Mix Scene Data
Data Source
Mix scene name
CH1–16, ST IN, SEND3, SEND4,
ON/OFF buttons
RTN1, RTN2, ST OUT
Phase settings CH1–16, ST IN
CH1–16, ST IN, RTN1, RTN2, ST
EQ
OUT
CH1–16, ST IN, RTN1, RTN2. In
Pan SEND3-4 stereo mode:
CH1–16-to-SEND3-4
ST OUT.
Balance In SEND3-4 stereo mode: SEND3-4
output, ST IN-to-SEND3-4
CH1–16, ST IN, SEND3, SEND4,
Fader
RTN1, RTN2, ST OUT
CH1–16 and ST IN to SEND1,
SEND faders
SEND2, SEND3, SEND4
SEND Pre/Post CH1–16, ST IN (all set together)
Channel pairs CH1–16
Group data A, B, C, D
Effects parameters Effect1, Effect2
Dynamics
COMP1, COMP2, COMP3
parameters
SEND3, 4 config
SEND3, SEND4
and STEREO
COMP PATCH
POINT
Edit Buffer Data
Same as Mix Scene data.
Control Data
This is the MIDI Control Change to ProMix 01 Parameter Assign-
ment Table. See the Additions section at the end of this User's Guide .
Program Data
This is the ProMix 01 Mix Scene to MIDI Program Change Assign-
ment Table. See the Additions section at the end of this User's Guide.
Details
Eight characters
ON/OFF
Normal/reverse
ON/OFF, frequency,
gain, Q/shelf
33-position
33-position
128-position resolution
128-position resolution
Pre/post
ON/OFF
CH1–16, ST IN
Program numbers and
10 effects parameters
from Effect1 and Ef-
fect2 (20 in total)
Patch point, ON/OFF,
KEYIN, program num-
bers, and 5 parameters
from each (15 in total)
Stereo/mono
Post-fader/pre-fader