About Cue; Cue Modes; Group Cue - Yamaha Programmable Mixer 01 User Manual

50
Chapter 5: CUE
ProMix 01 User's Guide

About CUE

ProMix 01 CUE provides comprehensive monitoring of virtually all
inputs and outputs. The CUE signal is output to the MONITOR
OUTPUT and PHONES. Output levels are controlled using the
MONITOR OUT LEVEL control and PHONES LEVEL control,
respectively.

CUE Modes

There are three CUE modes: MIX, LAST CUE, and ST FIX. The fol-
lowing table shows how they work in relation to the LCD functions.
CUE MODE
CUE
MIX
LAST CUE LAST CUE
ST FIX
MIX — this mode can be used only when the CUE LCD function is
selected. When this mode is selected, the message "Select a channel
to CUE" appears and the selected channel's [SEL] button LED goes
OFF. The [SEL] buttons can then be used to add channels to the CUE
mix. Stereo-pair channels are cued together. This mode is equivalent
to the CUE function on a conventional mixer.
LAST CUE — in this mode, the currently selected channel is cued.
Stereo-pair channels are cued together. This mode is active when LCD
functions other than GROUP are selected.
ST FIX — in this mode, CUE follows the main stereo output (i.e. it's
fixed to ST OUT). It is not affected when either the CUE or GROUP
LCD function is selected.

Group CUE

When the GROUP LCD function is selected, you can listen to a
post-fader mix of all channels in the selected group via CUE. This
makes it easy to balance faders in a group. It works only when the CUE
mode is set to MIX or LAST CUE, not when it's set to ST FIX. When
another LCD function is selected, CUE returns to normal operation.
Selected LCD Function
GROUP
MIX
GROUP
ST FIX
Others
LAST CUE