Videoplus+ Extend; Using The Tape Counter - Samsung SV-647B/XEU Instruction Manual

VIDEOPLUS+ EXTEND

GB
PROG OPTIONS INSTALL
BONUS
CLOCK BONUS LANG
EASY OPERATION
➛❿!! OK END: MENU
$ ❷!!
BONUS
PDC/VPS DEFAULT :OFF
VIDEOPLUS EXTEND :OFF
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
INFO TAG DELETE
❿ END: MENU
$ ❷

Using the Tape Counter

0:00:00
CLR/RST F.ADV INDEX
-/--
2
SELECT
TV VCR INPUT
REPEAT
AUDIO DISP./
2
VOL PROG/TRK
40
To prevent delays or over-runs the VCR has a function called
Videoplus EXTEND allowing you to extend the recording time by
up to 60 minutes.
Only use if PDC is not available or set to OFF.
1
Press the MENU button on the remote control.
2 or ➛, ❿ buttons to select the
Press the corresponding ,
$ ❷
EASY OPERATION option.
3 Press the OK button to select this option.
Result: The menu is displayed.
EASY OPERATION
4
Press the corresponding or buttons, until the
$ ❷
VIDEOPLUS EXTEND option is selected.
5 Press ➛ or ❿ buttons to set the Videoplus EXTEND time by
increments of 10 minutes.
6 To turn off, press ➛ or ❿ buttons repeatedly until
The tape counter:
Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
Is reset when a cassette is inserted in the VCR
Allows you to find the beginning of a sequence easily
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1
Insert a cassette in your VCR.
2
To set the tape counter to zero at the beginning of a sequence:
Press DISP./ twice to display the counter
Press CLR/RST when you want to set the tape counter to
zero
3
When you are ready,
Start playback or Recording.
Press the button.
To fast-froward or rewind to the sequence at which the
counter was set to zero, press ➛ ➛ or ❿ ❿ .
Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 15).
Press DISP./ :
Once to display the current function, programme
number, recording speed, date, time and counter
Twice to display the counter only
Three times to display the time remaining on the
cassette
Four times to clear the display
AV-Link Function of this VCR
If your TV has "Easy Link / nexTViewLink / AV-Link" function, the VCR can automatically store stations
memorized in the TV in the same channel position as those of the TV.
Using a SCART cable (21 pins), a mutual control is available with the TV, VCR, SAT receiver, etc.
The VCR automatically stores all your current TV stations in the VCR in the same position order as the
TV channels. ("TV CH DOWNLOAD")
Even if the TV is in standby mode, the TV automatically turns on and displays the video picture when
you start playback on the VCR.
The VCR automatically selects the same picture as you are watching on the TV, and record it. ("TV
PICTURE")
The VCR takes in the data and turns to timer standby mode, after a program data reserved is
transferred to the VCR by a TV using such as a EPG (Electronic Program Guide). In this case, the TV's
and the VCR's channel position must be set to the same TV station. The position could be stored from
1 to 80. Also the VCR's clock must be set.
Connection
Connect your EasyLink / nexTViewLink / AV-Link TV to the AV1 (EURO AV) socket on the rear of the VCR using the
SCART cable. Refer to your TV's manual additionally.
OFF shows.
- Connection to your EasyLink / nexTViewLink / AV-Link TV
AERIAL IN
When connecting another VCR supporting EasyLink / nexTViewLink / AV-Link functions
The "nexTViewLink" system can connect 2 VCRs (VCR1 and VCR2) at the same time. This VCR is adjusted to
"VCR1", so it should be connected to VCR2.
TV
- Connection to your EasyLink / nexTViewLink / AV-Link TV and a satellite receiver
Satellite antenna
TV
AERIAL IN
TV
AERIAL INPUT
AUDIO/VIDEO
AERIAL OUTPUT TV
IN/OUT (SCART) SCART Cable
this VCR
VCR2 VCR1
SCART cable
SCART cable
IN/OUT(SCART)
AERIAL INPUT
AERIAL OUTPUT
SCART cable
SATELLITE IN
AERIAL INPUT
AV2 (DEC./EXT.)
OUT/SORTIE
AUDIO/VIDEO
TV
AV1 (EURO AV)
21 pins SCART cable
IN/OUT(SCART)
GB
AV2 (DEC./EXT.)
OUT/SORTIE
R/D
AUDIO
L/G
AV1 (EURO AV)
R/D
AUDIO
L/G
41