Table of Contents
Advertisement
Playing a Cassette
GB
2
3
REC
MENU
OK
Adjusting Picture Alignment Manually
TV
VCR
INPUT
REPEAT
AUDIO
DISP./
VOL
PROG/TRK
28
This function allows you to play back any pre-recorded cassette.
1
Switch on both the television and your VCR.
2
Insert the video cassette to be played. If the safety tab on the
❿
cassette is intact, press
ll.
Otherwise, the cassette is played automatically.
When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
NTSC tapes can be played back but cannot be recorded
with this VCR.
3
To...
Then press...
Stop the playback
(STOP).
Eject the cassette
(EJECT).
The Picture Adjustment feature allows you to adjust the alignment
manually to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust alignment
manually by pressing the PROG/TRK ($ or ❷) buttons until the picture is
clear and stable.
Result:
The tracking bar appears.
The image is adjusted.
The tracking bar disappears when you release the button.
Intelligent Picture Control
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1
During playback, press the MENU button on the remote control.
Result:
The programming menu is displayed.
or ➛, ❿ buttons to select the
2
Press the corresponding
,
$
❷
option.
USER SET
3
Press the OK button to select this option.
Result:
The
menu is displayed.
USER SET
4
Press the corresponding
or
buttons, until the
$
❷
selected.
5
Press the ❿!button to select the IPC (intelligent picture control)
option.
When intelligent picture control mode is
of the image is adjusted automatically.
6
To adjust the sharpness manually, press the
❷
IPC mode
OFF
.
7
Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
If you do not press a button within ten seconds, the
PICTURE
menu disappears automatically.
8
On completion, press the MENU button again.
PROG
OPTIONS
OPTIONS
INSTALL
CLOCK
BONUS
LANG
USER SET
➛❿!!
OK
END:
$ ❷!!
IPC
option is
PTIONS
OSD
:ON
TAPE SELECT
:E180
ON
, the sharpness
COLOUR SYSTEM
:AUTO
FORMAT 16:9
:AUTO
NICAM
:ON
ECO. MODE
:OFF
button to turn the
IPC
:ON
❿
END:
$ ❷
**
PICTURE
**
IPC
:
OFF
SOFTEN
SHARPEN
*
--------
-----
➛❿
ON/OFF:
29
GB
MENU
MENU
❷
Advertisement
Table of Contents
