Download Print this page

Samsung SV-261I Instruction Manual: Using The Videoplus+ Feature (sv-665b/sv-265b Only)

Samsung video cassette recorder instruction manual.
Hide thumbs

Advertisement

Using the VIDEOPLUS+ Feature (SV-665B/SV-265B Only)

GB
SPEED
DUB
TV/VCR
TIMER
1
** TIMER METHOD **
STANDARD
VIDEOPLUS
END:
MENU
VIDEOPLUS
CODE ---------
CODE:0-9
CORRECT:
END:MENU
1/JAN WED
21:28
PROG
PR DAY
START STOP
V/P
1 WE 1 12:00 12:50SP ON
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
DELETE:CLR/RST
MENU
(SV-665B)
(SV-265B)
STANDBY/ON
VCR STANDBY/ON
S
S
7
7
SH
SH
26
Before presetting your VCR:
Switch on both the television and your VCR
Check that the date and time are correct
Insert the cassette on which the programme is to be
recorded (safety tab intact)
Up to six programmes can be preset.
1
Press the TIMER button.
Result:
The
is displayed.
TIMER METHOD
2
Press the corresponding
or
buttons, until the
option is selected.
3
Press the button to select
VIDEOPLUS
.
Result:
A message is displayed to allow you to enter the
VIDEOPLUS+ code.
If all six programmes have been set, the message
IS FULL
is displayed. Refer to page 29 if you wish to
cancel a preset recording.
4
Press the numeric buttons to enter the code opposite the
programme that you wish to record in your television magazine.
If you wish to correct the VIDEOPLUS+ code that you are
entering:
Press the
button until the digit to be corrected is
cleared
Enter the correct digit
5
Press the MENU button.
Result:
The information concerning the programme is displayed.
When using the VIDEOPLUS+ function for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
pressing the
or
buttons. Refer to the following page if:
The programme number or times flash
You wish to modify the programme
6
If the programme and times are correct, press the MENU button.
7
Press the VCR STANDBY/ON (STANDBY/ON) button to activate
the timer.
8
Refer to page 29 if you wish to:
Check that your VCR has been programmed correctly
Cancel a preset recording
The numbers next to each TV programme listing are
VIDEOPLUS+ code numbers, which allow you to
programme your videorecorder instantly with the remote
control. Tap in the VIDEOPLUS+ code for the programme
you wish to record.
™ VIDEOPLUS+ is a trademark of Gemstar Development Corporation. The VIDEOPLUS+
system is manufactured under licence from Gemstar Development Corporation.
Modifying VIDEOPLUS+ Programming
(V-665B/SV-265B Only)
If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press MENU a second time to confirm.
If you wish to...
Select an input source other
than the tuner (AV1, AV2 or
AUX (SV-665B only))
VIDEOPLUS
Record a programme every day
TIMER
(Monday to Sunday) at the same time
Record a programme every week
on the same day and at the same time
Extend the recording time
Select the recording speed
Select the PDC recording
Then...
Press the
or
buttons, until the
PR
selection flashes.
Press the INPUT button one or more times to change the
input source selection.
Result:
The programme number is replaced by:
The AV1, AV2 or AUX (SV-665B only)
source using the INPUT button for a satellite tuner
or external video source
The input source must be selected before changing any
other value.
Press the
or
buttons, until the
DAY
selection flashes.
Press the
or
buttons, until the
DLY
(Daily) value is
displayed.
Press the
or
buttons, until the
DAY
selection flashes.
Press the
or
buttons, until the
W-
(Week) value is
displayed, followed by the required day.
Example:
W-SA
(Weekly Saturday)
Press the
or
buttons, until the
STOP
selection flashes.
Press the
or
buttons to increase or decrease the stop
time.
Press the
or
buttons, until the recording speed selection
flashes.
Press the
or
buttons until the correct indication is
displayed:
• AUTO
(Auto Tape Speed Select) : see page 28
• SP
(Standard Play)
• LP
(Long Play)
Press the
or
buttons, until the V/P selection flashes.
Press the
or
buttons until the "ON" indication is displayed.
Do not select PDC unless you are sure the programme you
wish to record is broadcast with PDC. If you do set PDC ON
(by selecting "ON" in the right - hand column on the screen),
then you must set up the start-time EXACTLY according to
the published TV schedule. Otherwise the timer recording
won't take place.
27
GB

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: