Table of Contents
Advertisement
Using the TV Buttons on the Remote Control
GB
VCR STANDBY/ON
TV STANDBY/ON
SLOW
1
SHUTTLE
V-LOCK
2
CLR/RST
F.ADV
INDEX
-/--
2
SELECT
TV
VCR
INPUT
REPEAT
CLR/RST
F.ADV
INDEX
-/--
SELECT
TV
VCR
INPUT
3
5
REPEAT
4
AUDIO
DISP./
VOL
PROG/TRK
5
TV
VCR
INPUT
REPEAT
6
AUDIO
DISP./
VOL
PROG/TRK
6
TV
VCR
INPUT
REPEAT
AUDIO
DISP./
VOL
PROG/TRK
7
48
Your VCR remote control will work with Samsung televisions and
compatible brands.
To determine whether your television is compatible, follow the instructions
below.
1
Switch your television on.
2
Point the remote control towards the television.
3
Hold down the TV button and enter the two-figure code
corresponding to the brand of your television, by pressing the
appropriate numeric buttons.
Brand
Codes
Brand
SAMSUNG
01 to 06
PHILIPS
AKAI
09, 23
SABA
GRUNDIG
09, 17, 21
SONY
LOEWE
02
THOMSON
PANASONIC
08, 23 to 27
TOSHIBA
Result:
If your television is compatible with the remote control, it
is switched off. It is now programmed to operate with the
remote control.
If several codes are indicated for your television brand, try
each one in turn until you find one that works.
When you change the batteries in the remote control, you
must reprogramme the code, following the same procedure.
You can then control the television using the following buttons.
Button
Function
TV STANDBY/ON
Used to switch the television on and off.
TV or VCR
Used to switch between the TV and VCR modes.
+
–
Only the VOL (
or
) and TV STANDBY/ON
buttons are operational in VCR mode.
-/--
Used to enter a two-figure programme number.
Example: For programme 12, press -/-- followed
by numeric buttons 1 and 2.
INPUT
Used to select an external source.
+
–
VOL
or
Used to adjust the volume of the television.
PROG/TRK
Used to select the required programme.
($ or ❷)
DISP./
Used to switch between an external source and
the television tuner.
The various functions will not necessarily work on all
televisions. If you encounter problems, operate the
television directly.
Auto Power Off
The Auto Power Off feature automatically turns off your VCR if no
signal is received and you do not press any button for the selected
time.
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
EASY OPERATION
3
Press the OK button to select this option.
Result:
The
Codes
4
Press the corresponding
AUTO POWER OFF
02, 20, 22
13, 14, 22 to 24
5
Press the ❿ button, until you select the time of Auto Power off
15, 16
interval.
13, 14, 24
OFF
07, 16 to 19, 21
6
On completion, press MENU twice to exit the menu.
ECO Mode-Reducing Standby power consumption
Low Power Mode reduces the Standby power consumption of the
VCR when in Standby mode.
Useful, for example, when you are away from the house on holiday.
It saves actually turning the VCR off.
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
USER SET
option.
3
Press the OK button to select this option.
Result:
The
4
Press the corresponding
is selected.
5
Press the ❿!button to turn LOW(3Watts) mode on. Now, when the
VCR is standby mode the front display panel will shut off.
Even the clock disappears. By pressing the STANDBY/ON button
again the display panel will reappear.
6
On completion, press MENU twice to exit the menu.
or ➛, ❿ buttons to select the
,
$
❷
option.
EASY OPERATION
menu is displayed.
or
buttons, until the
$
❷
option is selected.
2HOUR
3HOUR
,
or ➛, ❿ buttons to select the
$
❷
menu is displayed.
USER SET
or
buttons, until the
ECO. MODE
$
❷
GB
PROG
OPTIONS
INSTALL
CLOCK
BONUS
BONUS
LANG
EASY OPERATION
➛❿!!
OK
END:
MENU
$ ❷!!
BONUS
PDC/VPS DEFAULT
:OFF
VIDEOPLUS EXTEND
:OFF
AUTO POWER OFF
:OFF
REPEAT PLAY
:OFF
NO. OF
INTERVAL REPEAT : 5
INFO TAG DELETE
❿
END:
MENU
$ ❷
OPTIONS
PROG
OPTIONS
INSTALL
CLOCK
BONUS
LANG
USER SET
➛❿!!
OK
END:
MENU
$ ❷!!
PTIONS
OSD
:ON
TAPE SELECT
:E180
COLOUR SYSTEM
:AUTO
FORMAT 16:9
:AUTO
NICAM
:ON
ECO. MODE
:OFF
IPC
:ON
❿
END:
MENU
$ ❷
49
Advertisement
Table of Contents
