Videoplus+ Extend (Sv-645B/Sv-643B Only); Using The Tape Counter - Samsung SV-643B Instruction Manual

VIDEOPLUS+ EXTEND (SV-645B/SV-643B Only)

To prevent delays or over-runs the VCR has a function called
Videoplus EXTEND allowing you to extend the recording time by
up to 60 minutes.
PROG OPTIONS INSTALL
Only use if PDC is not available or set to OFF.
BONUS
CLOCK BONUS LANG
1
Press the MENU button on the remote control.
EASY OPERATION
2
Press the corresponding
➛❿!! OK END: MENU EASY OPERATION
$ ❷!!
3
Press the OK button to select this option.
Result:
4 Press the corresponding
BONUS
PDC/VPS DEFAULT :OFF
VIDEOPLUS EXTEND
VIDEOPLUS EXTEND :OFF
AUTO POWER OFF :OFF
5 Press ➛ or ❿ buttons to set the Videoplus EXTEND time by
REPEAT PLAY :OFF
NO. OF increments of 10 minutes.
INTERVAL REPEAT : 5
6 To turn off, press ➛ or ❿ buttons repeatedly until
❿ END: MENU
$ ❷

Using the Tape Counter

The tape counter:
Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
Is reset when a cassette is inserted in the VCR
Allows you to find the beginning of a sequence easily
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
0:00:00
1
Insert a cassette in your VCR.
2 To set the tape counter to zero at the beginning of a sequence:
Press DISPLAY twice to display the counter
CLR/RST F.ADV INDEX Press CLR/RST when you want to set the tape counter to
zero
2
3
When you are ready,
A.TRK IPC INPUT
Start playback or Recording.
Press the
REPEAT
To fast-froward or rewind to the sequence at which the
counter was set to zero, press
AUDIO DISPLAY
2
TRK PROG
Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 16).
Press DISPLAY:
38
or ➛, ❿ buttons to select the
,
$ ❷
option.
The EASY OPERATION menu is displayed.
or buttons, until the
$ ❷
option is selected.
OFF shows.
button.
➛ ➛ or ❿ ❿ .
Once to display the current function, programme
number, recording speed, date, time and counter
Twice to display the counter only
Three times to display the time remaining on the
cassette
Four times to clear the display
Connecting an RCA Audio/Video Input Cable
(SV-645B Only)
You can connect other audio/video equipment to your VCR using
audio/video cables if the appropriate outputs are available on the
equipment chosen.
Examples: You wish to copy a video cassette with the help of a
second VCR (see page 40).
You wish to play back and/or copy pictures taken
with a camcorder (see page 40).
Regardless of the type of connection chosen, you
must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the screen
when the VCR is switched off.
Make sure that both the television and the VCR are
switched off before connecting the cables.
1
Connect one end of the RCA audio/video cable into the VIDEO
INPUT socket on the front of the VCR.
2 Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
3 Connect one end of the RCA audio cable supplied into the AUDIO
INPUT sockets on the front of the VCR.
Take care to respect the colour coding of the left and right
channels.
4
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).
GB
EJECT
STANDBY/ON
VIDEO L - AUDIO - R
AUX
1
EJECT
STANDBY/ON
VIDEO L - AUDIO - R
AUX
3
3
39