Using the Assemble
Edit Function
]
This function
enables
you
to start a new
recording
at a specific
position
on the cassette
while
maintaining
a very smooth
scene
change.
1
insert the cassette to be edited in your VCR.
2
Press the PLAY button (_)
to start playback.
3
When you reach the position from which you wish to start the new
recording, press the P/STILL button (11).
4
Press the P/STILL button (11) again as often as necessary
to
advance frame by frame, until the exact recording
position is
located.
5
While the VCR is in still mode, press the REC button at least one
second to activate the Assemble Edit function.
Result:
The Record symbol (©) flashes on the display.
6
Select the source from which you wish to record by pressing:
•
the CH ( •
or •)
buttons for television channels ; or
•
the INPUT button for the SC, AV, LI or L2 input sources.
•
Perform necessary hookups and activate source. Refer to
page 39.
7
Press the P/STILL button (11) to start recording.
8
When you have finished recording, press STOP (•).