Connecting Your Vcr To The Tv Using The Rca Cable; Connecting Other Equipment To Your Vcr - Samsung SV-270 Instruction Manual

Connecting Your VCR to the TV
using the RCA Cable
You can connect your VCR to the television using the
RCA cable if the appropriate input is available on the
television. You thus:
Obtain better quality sound and pictures
Simplify the setting up procedure of your VCR
Regardless of the type of connection
chosen, you must always connect the
coaxial cable supplied. Otherwise, no
picture will be visible on the screen
when the VCR is switched off.
Make sure that both the television and
the VCR are switched off before
connecting the cables.
1
Connect the coaxial cable as indicated in the above
section.
2
Connect one end of the RCA Audio/Video cable to
the Video output and Audio output socket on the
rear of the VCR.
3
Plug the other end into the appropriate connector
on the television.
SV-675/SV-670
TV
RF
coaxial cable
SV-470/SV-275/SV-270
TV
RF
coaxial cable
Aerial
LINE LINE
OUT IN 1
2
R
AUDIO
L
TV
VIDEO
Aerial
2
LINE LINE
OUT IN 1
AUDIO
TV
VIDEO
Connecting Other Equipment to
Your VCR
You can connect other audio and/or video equipment
to your VCR in different ways. The following
illustrations give a few examples of the connection
possibilities.
The RCA input/output connectors on the front
of the VCR are used for equipment, such as
camcorders, VCRs or sound systems.
SV-675
VIDEO L AUDIO R
LINE IN 2
FRONT OF THE VCR
SV-275
LINE IN 2
FRONT OF THE VCR
ENG-9
LINE LINE
OUT IN 1
R
L
REAR OF THE VCR
Camcorder
VCR
Sound system
LINE LINE
OUT IN 1
REAR OF THE VCR