Presetting The Stations Automatically - Samsung SV-270 Instruction Manual

Presetting the Stations Automatically

You do not need to preset the stations if you have
already set them automatically (see Plug & Auto
Set Up on page 10).
Your VCR contains a built-in tuner used to receive
television broadcasts.
You must preset the stations received through the tuner.
This can be done:
Plug & Auto Set up (see page 10)
Automatically
Manually (see page 14)
You can store up to 80 stations.
1
Press the MENU button on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
select the INSTALLATION option.
INSTALL
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALLATION
➛❿
OK END:
❷
3
Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
4
Press the corresponding
AUTO SET UP option is selected.
❿
Press the button to select this option.
Australia Only
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
❿
❷ END:
Newzealand Only
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH36
❿
END:
❷
➛ ❿
,
or , buttons to
❷
MENU
or buttons, until the
❷
MENU
MENU
ENG-13
INSTALL
YOUR DATA WILL BE LOST
PRESS OK TO CONTINUE
MENU TO EXIT
5
Press OK to start the auto scanning.
Result: The PLEASE WAIT indication flashes on
the television screen.
The first frequency band is scanned and
the first station found is displayed and
stored.
The VCR then searches for the second
station and so on.
When the automatic scanning procedure
has finished, the VCR switches
automatically to programme 1.
The number of stations automatically stored by the
VCR depends on the number of stations that it has
found.
AUTO SET UP
PLEASE WAIT
I--------------------I
END:MENU
6
If you wish to cancel the auto scanning before the
end, press the MENU button three times to exit the
menu.
Once the auto scanning procedure has finished,
some stations may have been stored more than
once; select the stations with the best reception and
delete the ones no longer required (see page 15).
2%