Choosing Your Language; Setting The Vcr Output Channel - Samsung SV-270 Instruction Manual

Choosing Your Language

You can change the language in which information is
displayed on the screen.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
select the LANGUAGE SET option.
PROG OPTIONS INSTALL
CLOCK BONUS LANG LANG
LANGUAGE SET
➛❿
OK END:
❷
3
Press the OK button to select this option.
Result: The LANGUAGE SET menu is displayed.
4
Select the required language by pressing the
❷
or buttons.
5
Press OK to store the language selected.
6
Press MENU to exit the menu.
Result: From now on, all the on-screen information
will be displayed in the language selected.
➛ ❿
,
or , buttons to
❷
MENU
ENG-12
Setting the VCR Output Setting the VCR Output
Channel Channel
Your VCR output channel may need to be changed if
the pictures suffer from interference or if your TV
cannot find the pictures.
Also, you can change the VCR output channel to adjust
the frequency in which information is displayed on the
screen.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
select the INSTALLATION option.
INSTALL
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALLATION
➛❿
OK END:
❷
3
Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
4
Press the corresponding
VCR OUTPUT CH option is selected.
Australia Only
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
❿
END:
❷
Newzealand Only
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH36
❿
END:
❷
5
Select the required output channel by pressing the
➛ ❿
or buttons.
6
On completion, press MENU twice to exit the menu.
Then tune your television again (see page 10).
➛ ❿
,
or , buttons to
❷
MENU
or buttons, until the
❷
MENU
MENU