Table of Contents
Advertisement
Deciding How to Connect Your VCR
GB
You must take into account various factors when connecting audio or video systems:
Types of connectors available on your systems
Systems connected permanently to the VCR (satellite receiver for example) or temporarily
(camcorder for example)
Your VCR is equipped with the following connectors.
Connector
Location
LINE IN 1
Rear
VIDEO
AUDIO
VIDEO
R
L
LINE IN 1
LINE IN 2
Front
LINE IN 2
VIDEO
L AUDIO R
VIDEO
LINE IN 2
(SV-660GS)
(SV-465GS/SV-264GS
VIDEO
Audio/Video
Rear
VIDEO
AUDIO
R
L
output
LINE IN 1
LINE OUT
OUT TO TV
Rear
TV
IN FROM ANT. Rear
Whenever you connect an audio or video system to your VCR, ensure that all elements are
switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions
and associated safety precautions.
10
Type
Direction
Recommended Use
Audio/Video RCA
In
AUDIO
LINE IN 1
Audio/Video RCA
In
AUDIO
)
AUDIO
Audio/Video RCA Out
LINE IN 1
LINE OUT
75
Out
Television
coaxial
75
In
Aerial
coaxial
Cable television network
Satellite receiver
Connecting Your VCR to the TV using the Coaxial Cable
To receive television programmes a signal must be received from
one of the following sources:
An outdoor aerial
An indoor aerial
A cable television network
A satellite receiver
Make sure that both the television and the VCR are
switched off before connecting the cables.
1
Remove the aerial or network input cable from the television.
2
Connect this cable to the 75 coaxial socket marked
rear of your VCR.
Satellite receiver
3
Television
Plug the coaxial cable supplied into the
Other VCR
4
Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
Audio system
Camcorder
5
To obtain better quality pictures and sound on your television, you
can also connect your VCR to the television via the RCA cable
(see section below) if your television is equipped with this type of
connection.
Television
Other VCR
Audio system
Connecting Your VCR to the TV using the RCA Cable
RF
coaxial
cable
You can connect your VCR to the television using the RCA cable if the appropriate input is available on the
television. You thus:
Obtain better quality sound and pictures
Simplify the setting up procedure of your VCR
1
Connect the coaxial cable as indicated in the above section.
2
Connect one end of the RCA Audio/Video cable to the Video output and Audio output socket on the rear
of the VCR.
3
Plug the other end into the appropriate connector on the television.
on the
socket on your VCR.
TV
Aerial
SV-660GS
2
VIDEO
AUDIO
R
L
LINE IN 1
TV
LINE OUT
Regardless of the type of connection chosen, you must always connect the coaxial cable
supplied. Otherwise, no picture will be visible on the screen when the VCR is switched off.
Make sure that both the television and the VCR are switched off before connecting the cables.
GB
VIDEO
AUDIO
LINE IN 1
TV
2
LINE OUT
TV
VIDEO
AUDIO
LINE IN 1
TV
LINE OUT
3
4
Aerial
SV-465GS/264GS
VIDEO
AUDIO
LINE IN 1
TV
LINE OUT
11
Advertisement
Table of Contents
