Deciding How To Connect Your Vcr; Connecting Your Vcr To The Tv Using The Coaxial Cable; Connecting Your Vcr To The Tv Using The Rca Cable - Samsung SV-3000 Instruction Manual

Deciding How to Connect Your VCR

GB
You must take into account various factors when connecting audio or video systems:
Types of connectors available on your systems
Systems connected permanently to the VCR (satellite receiver for example) or temporarily
(camcorder for example)
Your VCR is equipped with the following connectors.
Connector Location
LINE IN 1 Rear
VIDEO AUDIO
VIDEO AUDIO VIDEO AUDIO
R L
LINE IN 1 LINE IN 1
LINE IN 2 Front
VIDEO AUDIO
VIDEO L AUDIO R
LINE IN 2
Audio/Video Rear
output
VIDEO VIDEO AUDIO AUDIO VIDEO AUDIO
R L
LINE IN 1 LINE IN 1 LINE IN 1
LINE OUT LINE OUT LINE OUT
OUT TO TV Rear
TV
IN FROM ANT. Rear
Whenever you connect an audio or video system to your VCR, ensure that all elements are
switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions
and associated safety precautions.
10
I I
Type Direction Recommended Use
Audio/Video RCA In Satellite receiver
Television
Other VCR
LINE IN 1
Audio/Video RCA In Audio system
Camcorder
I I
LINE IN 2
Audio/Video RCA Out Television
Other VCR
Audio system
75 Out Television
coaxial
75 In Aerial
coaxial Cable television network
Satellite receiver
I I

Connecting Your VCR to the TV using the Coaxial Cable

To receive television programmes a signal must be received from
one of the following sources:
An outdoor aerial
An indoor aerial
A cable television network
A satellite receiver
Make sure that both the television and the VCR are
switched off before connecting the cables.
1
Remove the aerial or network input cable from the television.
2 Connect this cable to the 75 coaxial socket marked
rear of your VCR.
3
Plug the coaxial cable supplied into the socket on your VCR.
4
Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
5
To obtain better quality pictures and sound on your television, you
can also connect your VCR to the television via the RCA cable
(see section below) if your television is equipped with this type of
connection.

Connecting Your VCR to the TV using the RCA Cable

TV Aerial
SV-3000
2
RF VIDEO AUDIO
R L
coaxial
cable TV
You can connect your VCR to the television using the RCA cable if the appropriate input is available on the
television. You thus:
Obtain better quality sound and pictures
Simplify the setting up procedure of your VCR
Regardless of the type of connection chosen, you must always connect the coaxial cable
supplied. Otherwise, no picture will be visible on the screen when the VCR is switched off.
Make sure that both the television and the VCR are switched off before connecting the cables.
1
Connect the coaxial cable as indicated in the above section.
2 Connect one end of the RCA Audio/Video cable to the Video output and Audio output socket on the rear
of the VCR.
3 Plug the other end into the appropriate connector on the television.
VIDEO AUDIO
LINE IN 1
TV
LINE OUT
2
on the
VIDEO AUDIO
LINE IN 1
TV
LINE OUT
3
Aerial
SV-910/SV-900/SV-810/SV-800
VIDEO AUDIO
LINE IN 1
LINE IN 1
TV
LINE OUT
LINE OUT
11
GB
TV
4