Plug & Auto Set Up; Tuning Your Television For The Vcr - Samsung SV-270 Instruction Manual

Hide thumbs Also See for SV-270:
Table of Contents

Advertisement

Plug & Auto Set Up
Your VCR will automatically set itself up when it is
plugged into the mains for the first time. TV stations
will be stored in memory. The process takes a few
minutes. Your VCR will then be ready for use.
1
Connect the coaxial cable as indicated on page
8~9. (Connecting Your VCR to the TV Using the
Coaxial Cable)
LINE
LINE
OUT
IN 1
R
AUDIO
L
TV
VIDEO
2
Plug the VCR into the mains.
Result: The LANGUAGE SET menu is displayed.
3
Select the required language by pressing the
or
buttons.
4
Press OK to store the language selected.
Result: A message appears.
5
Press OK to start the auto scanning.
The number of stations automatically stored by
the VCR depends on the number of stations that
it has found.
6
On completion, press MENU twice to exit the menu.
Auto preset can be performed by pressing
(STOP) on the VCR continuously for 5 seconds or
more with no tape inserted.
TV
ENG-10

Tuning Your Television for the VCR

You must tune your television for the VCR only if you
are not using a RCA cable
To view pictures from your VCR when a RCA
cable is used, the television must be set to the
audio/video mode (AV).
1
Switch on the television.
2
Switch on the VCR by pressing STANDBY/ON on
the front of the VCR or VCR STANDBY/ON on the
remote control.
3
Select a programme position on the television to be
reserved for use with your VCR.
4
Insert the video cassette in the VCR. Check that
the VCR starts reading the cassette; if not, press
button.
❿ II
5
Start a scan on your television or set the television
to UHF channel 38.
6
Fine tune the television until the pictures and sound
are obtained clearly.
7
If you cannot find the pictures and sound, or there
is interference from nearby channels, it may be
necessary to change the setting of the VCR output
channel (see Setting the VCR Output Channel on
page 12 and Problems and Solutions on page 31).
8
When the picture and sound are perfectly clear,
store this channel at the desired programme
position on the television.
Result: That programme is now reserved for use
with your VCR.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sv-470Sv-670Sv-675Sv-275

Table of Contents