Deciding How To Connect Your Vcr; Connecting Your Vcr To The Tv Using The Coaxial Cable; Connecting Your Vcr To The Tv Using The Rca Cable - Samsung SV-640GS Instruction Manual

Deciding How to Connect Your VCR

B
You must take into account various factors when connecting audio or video systems:
Types of connectors available on your systems
Systems connected permanently to the VCR (satellite receiver for example) or temporarily
(camcorder for example)
Your VCR is equipped with the following connectors.
Connector Location Type
LINE IN 1 Rear Audio/Video RCA
VIDEO AUDIO
R L
LINE IN 1
Audio/Video Rear Audio/Video RCA
output
VIDEO AUDIO
R L
LINE IN 1
LINE OUT
LINE IN 2 Front Audio/Video RCA
VIDEO L - AUDIO - R
LINE IN 2
75 Ω
OUT TO TV Rear
TV
coaxial
75 Ω
IN FROM ANT. Rear
coaxial
Whenever you connect an audio or video system to your VCR, ensure that all elements are
switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions
and associated safety precautions.
8
Direction Recommended Use
In Camcorder
Satellite receiver
Other VCR
Out Television
Other VCR
Audio Hi-Fi system
In Audio Hi-Fi system
Camcorder
Other VCR
Out Television
In Aerial
Cable television network
Satellite receiver

Connecting Your VCR to the TV using the Coaxial Cable

To receive television programmes a signal must be received from
one of the following sources:
An outdoor aerial
An indoor aerial
A cable television network
A satellite receiver
Make sure that both the television and the VCR are
switched off before connecting the cables.
1 Remove the aerial or network input cable from the television.
2 Connect this cable to the 75Ω coaxial socket marked
rear of your VCR.
3
Plug the coaxial cable supplied into the TV socket on your VCR.
4
Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
5 To obtain better quality pictures and sound on your television, you
can also connect your VCR to the television via the RCA cable
(see section below) if your television is equipped with this type of
connection.

Connecting Your VCR to the TV using the RCA Cable

TV Aerial
2
VIDEO
RF
coaxial
TV
cable
You can connect your VCR to the television using the RCA cable if the appropriate input is available on the
television. You thus:
Obtain better quality sound and pictures
Simplify the setting up procedure of your VCR
Regardless of the type of connection chosen, you must always connect the coaxial cable
supplied. Otherwise, no picture will be visible on the screen when the VCR is switched off.
Make sure that both the television and the VCR are switched off before connecting the cables.
1 Connect the coaxial cable as indicated in the above section.
2
Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rear
of the VCR.
3
Plug the other end into the appropriate connector on the television.
VIDEO AUDIO
R L
LINE IN 1
2 TV
LINE OUT
on the
TV
VIDEO AUDIO
R L
LINE IN 1
TV
LINE OUT
3
4
AUDIO
R L
LINE IN 1
LINE OUT
9
GB