Using The Tv Buttons On The Remote Control (Sv-675/V-670/Sv-470/Sv-275 Only); Auto Power Off - Samsung SV-270 Instruction Manual

Using the TV Buttons on the
Remote Control
SV-470/SV-275 Only)
Your VCR remote control will work with Samsung
televisions and compatible brands.
To determine whether your television is compatible,
follow the instructions below.
1
Switch your television on.
2
Point the remote control towards the television.
3
Hold down the TV button and enter the two-figure
code corresponding to the brand of your television,
by pressing the appropriate numeric buttons.
Brand Codes
SAMSUNG 01 to 06
AKAI 09, 23
GRUNDIG 09, 17, 21
LOEWE 02
PANASONIC 08, 23 to 27
Result: If your television is compatible with the
remote control, it is switched off. It is now
programmed to operate with the remote
control.
If several codes are indicated for your
television brand, try each one in turn until you
find one that works.
When you change the batteries in the remote
control, you must reprogramme the code,
following the same procedure.
You can then control the television using the following
buttons.
Button Function
TV STANDBY/ON Used to switch the television on
and off.
TV or VCR Used to switch between th TV
and VCR modes. Only the VOL
(+ or –) and TV STANDBY/ON
buttons are operational in VCR
mode. -/-- Used to enter a two-
figure programme number.
Example: For programme 12,
INPUT Used to select an external
source.
VOL + or – Used to adjust the volume of
the television.
PROG/TRK Used to select the required
( or ) programme.
❷
DISP./ Used to switch between an
external source and the television
The various functions will not necessarily work on
all televisions. If you encounter problems, operate
the television directly.
(SV-675/SV-670/
Brand Codes
PHILIPS 02, 20, 22
SABA 13, 14, 22 to 24
SONY 15, 16
THOMSON 13, 14, 24
TOSHIBA 07, 16 to 19, 21
press -/-- followed by
numeric buttons 1 and 2.
ENG-29

Auto Power off

The Auto Power Off feature automatically turns off
your VCR if no signal is received and you do not press
any button for the selected time.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
select the EASY OPERATION option.
3
Press the OK button to select this option.
Result: The EASY OPERATION menu is displayed.
4
Press the corresponding
AUTO POWER OFF option is selected.
BONUS
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
❿
END:
❷
❿
5
Press the button, until you select the time of Auto
Power off interval.
OFF 2HOUR
6
On completion, press MENU twice to exit the menu.
➛ ❿
,
or , buttons to
❷
or buttons, until the
❷
MENU
3HOUR