Table of Contents
Advertisement
Using the Tape Counter
GB
The tape counter:
0:00:00
1
2
2
3
MARK
MODE
2
38
Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
Is reset when a cassette is inserted in the DVD-VCR
Allows you to find the beginning of a sequence easily
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
Insert a cassette in your DVD-VCR.
To set the tape counter to zero at the beginning of a sequence:
Press DISPLAY twice to display the counter
Press CLEAR when you want to set the tape counter to zero
To fast-forward or rewind to the sequence at which the counter
was set to zero, simply press
➛ ➛
or
❿ ❿
.
Result:
The DVD-VCR stops automatically when the counter
reaches zero.
Some DVD-VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 18).
Press DISPLAY:
Once to display the current function, programme
number, recording speed, date, time and counter
Twice to display the counter only
Three times to display the time remaining on the
cassette
Four times to clear the display
Connecting an RCA Audio/Video Input Cable
You can connect other audio/video equipment to your DVD-VCR
using audio/video cables if the appropriate outputs are available on
the equipment chosen.
Examples:
You wish to copy a video cassette with the help of a
second VCR (see page 40).
You wish to play back and/or copy pictures taken
with a camcorder (see page 40).
Make sure that both the television and the VCR are
switched off before connecting the cables.
1
Connect one end of the RCA audio/video cable into the VIDEO
socket on the Rear of the VCR.
2
Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
3
Connect one end of the RCA audio cable into the AUDIO sockets
on the Rear of the VCR.
Take care to respect the colour coding of the left and right
channels.
4
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).
GB
IN
LINE IN
LINE OUT
(FROM ANT.)
R
L
AUDIO
RF
OUT
R
L
(TO TV)
VIDEO
L
1
IN
LINE IN
LINE OUT
3
(FROM ANT.)
R
LINE OUT
AUDIO
RF
OUT
R
L
(TO TV)
3
VIDEO
L
AUDIO
39
Advertisement
Table of Contents
