Adjusting The External Component Input Level - Kenwood R-K1000 Instruction Manual

Connecting Other Accessories (Commercially Available Units) R P.13–15
Related
Audio Settings R P.37 onwards
Information
ClearA
SLEEP TIMER DISPLAY DIMMER
MODE
ROOM EQ SOUND
FLAT TONE
MODE PRESET
ENTER
TUNING
VOL
P.CALL
AUTO / MONO
TUNER D.AUDIO CD
BAND MUTE
TAPE
AUX PHONO
D-IN1 D-IN2 D-IN3
RANDOM REPEAT P.MODE CLEAR
RC-R0830E

Adjusting the External Component Input Level

Use the procedure below to adjust the input level for the external
component connected to the [PHONO IN], [TAPE IN] or [AUX IN]
terminal.
Use this adjustment when the volume from an external component
is noticeably higher or lower than other input sources at the same
volume setting.
1 1
Select the input source to adjust the input level.
Turn the [INPUT SELECTOR] knob and select the
input source to adjust the input level.
You can set the input level for each of PHONO, TAPE and AUX.
2 2
Press the [MODE] key.
3 3
Select "INPUT LEVEL".
Press the [A] or [B] key.
Press the [ENTER] key.
4 4
Set the input level.
Press the [A] or [B] key.
Press the [ENTER] key.
If you adjust the input level for PHONO or AUX, the output level from the
[TAPE OUT] terminal will also change.
External Components
You can adjust the input level in a
range from –3 to +5.
33
English