Kenwood R-K1000 Instruction Manual page 64

Troubleshooting
Tuner
Symptoms
I can't get reception
from a radio station.
There is interference
(noise).
I have used Auto Memory
and pressed the [P.CALL]
key, but I still can't get
radio reception.
Components connected to the D.AUDIO terminal
Symptoms
I can't use the remote
control or main unit to
control my Kenwood
digital audio player.
Remote control
Symptoms
The remote control does
not work.
I can't use R-K1000
remote control to
control the DP-K1000
(sold separately).
64
R-K1000
Possible Cause/Solution
Connect the antennas.
Select the broadcast band (AM or FM).
Tune the radio to the frequency of the desired station.
Install an outdoor antenna away from the road.
Turn off any electrical appliances that may be causing
interference.
Move the system away from the TV.
Run Auto Memory again.
Manually preset stations with frequencies that you can
receive.
Possible Cause/Solution
Connect the player using the dedicated cable.
Check whether the connected model is compatible.
Possible Cause/Solution
Insert new batteries.
Use the remote control from within its eff ective range.
Connect the system control cable properly.
Ref. page
10, 11
26
26
—
28
29
Ref. page
13
34
Ref. page
19
19
12