Kenwood R-K1000 Instruction Manual page 27

Presetting Stations Automatically (AUTO MEMORY) R P.28
Related
Presetting Stations Manually (Manual Preset) R P.29
Information
Audio Settings R P.37 onwards
ClearA
SLEEP TIMER DISPLAY DIMMER
MODE
ROOM EQ SOUND
FLAT TONE
MODE PRESET
ENTER
TUNING
VOL
P.CALL
AUTO / MONO
TUNER D.AUDIO CD
BAND
MUTE
AUX PHONO TAPE
D-IN1 D-IN2 D-IN3
RANDOM REPEAT P.MODE CLEAR
RC-R0830E
Choosing from stations that are not stored (Auto/Manual tuning)
1 Select Auto tuning or Manual tuning.
Press the [AUTO/MONO] key.
The mode changes as shown below each time you press the key.
AUTO
Auto tuning
(Select this mode when
reception is good.)
2 Select a station.
Press the TUNING [I]/[J] key.
When the station is tuned, "TUNED" lights up on the display. If
you are receiving a stereo signal, "ST. " also lights up.
Using Auto tuning
The radio automatically tunes in to the next station each time you press
the key. Repeat this step until you are tuned in to your preferred station.
Using Manual tuning
Press the key until the desired station is tuned or until you reach the
desired frequency.
There is no sound while Auto/Manual tuning is in progress.
Auto tuning provides stereo reception while manual tuning provides
monaural reception.
The display changes as shown below each time you press the
[DISPLAY] key.
FM:
Program service name R Preset No. R Day/Clock
AM or when the program service name is not stored:
Preset No. R Day/Clock (AM)
Preset No. R "NO PS" R Day/Clock (non-RDS)
Receiving Broadcast Stations
AUTO
lit
Manual tuning
(Select this mode when
reception is poor.)
unlit
27
English