Advertisement
Quick Links
STEREO
REVERBERATION
AMPLIFIER
RA-54
INSTRUCTION
MANUAL
KENWOOD
For your records
Record the serial number, found on the back of the unit,
in the spaces designated on the warranty card, and in
the space provided below. Refer to the model and serial
numbers whenever you call upon your dealer for infor-
mation or service on this product.
Model
Serial
number
Unpacking
Unpack
the
unit carefully
and
make
sure
that all
accessories and cables are put aside so they will not be
lost.
Examine
the
unit
for
any
possibility
of
shipping
damage.
If your unit is damaged
or fails to operate,
notify your dealer immediately. If your unit was shipped
to you directly, notify the shipping company
without
delay. Only the consignee
(the person
or company
receiving the unit) can file a claim against the carrier for
shipping damage.
We recommend that you retain the original carton and
packing materials for use should you transport or ship
the unit in the future.
Important!
U.S.A., Canada, Australia, U.K. and Europe
These units are not equipped with an AC voltage
selector
switch
and
the discussion
of such a
switch that follows should be disregarded.
All other countries
Units shipped
to countries
other than
U.S.A.,
Canada, Australia, U.K. and Europe are equipped
with an AC voltage selector switch on the rear
panel. Refer to the following paragraph for the
proper setting of this switch.
AC voltage selection
This unit operates on 110-120 volts or 220-240 volts
AC.The AC voltage selector switch on the rear panel is
set to the voltage that prevails in the area to which the
unit is shipped. Before connecting the power cord to
your AC outlet, make sure that the setting position of
this switch matches your line voltage. If not, it must be
set to your voltage in accordance with the following
direction.
Note:
Our
waranty
does
not cover
damage
caused
by excessive
line
voltage due to improper setting of the AC voltage selector switch.
AC 110-120V~ «pm AC 220-240V~
AC 110-120V~ 4m AC 220-240V~,
Switch lever
ois
@
—®
)
This shows switch
This shows switch
lever is locked in
lever is locked in
110-120V~
220-240V~
position.
position.
Move
switch
lever
to
match
your
line
voltage with a small screwdriver or other
pointed tool.
AC voltage selector switch
For United Kingdom
The mains plug must be removed from the wail socket
prior to any internal examination.
Important
The wires in this mains lead are coloured in accordance
with the following code:
The wires in this mains lead must be connected to the
terminals in the plug as follows:
Wire colour
Plug terminal marking
N or Black
L or Red
Brown to
Live
Blue to
Neutral
Plug
Notes:
@
——____________________
1) If a 13-amp plug is used, this must be fitted with a 5-amp
fuse.
2) If a 3-pin plug with earthing contact is used, no wire must
be connected to the E terminal.
WARNING:
PRINTED IN JAPAN B50-5689-00 (K,M,X,E) (T) E
6789101112/85 123456789101 112/86
Advertisement
