Connecting The System - Kenwood R-K1000 Instruction Manual

Connecting the System

Main Connections
Caution for
connection
AM loop antenna
Push into the
slot.
Room equalizer microphone
Connect this for ROOM EQ (Room
Equalizer) setup. Disconnect after
completing setup.
To AC wall
outlet
AC power cord
Insert the plug fi rmly
all the way into the
AC wall outlet.
10
R-K1000
Ensure that all the cords are securely connected. Loose or incomplete connections may
result in noise interference or no sound at all.
Do not plug the AC power cord into an AC wall outlet until all the connections are completed.
Before disconnecting any cords or cables, always turn the main unit off and unplug the power cord
from AC wall outlet.
1 Connect the lead to the [FM 75Ω] terminal.
2 Find the location that gives the best
reception.
3 Fix the antenna in place.
1
For more information,
see "Connecting Other
Accessories (Commercially
Available Units)" on P.13–15.
FM indoor antenna
Connect the lead (black) to the
[ANTENNA M] terminal.
The [ANTENNA M] terminal is
exclusively for the antenna. It is
not an earth terminal for safety
purpose.
Right speaker
2
3
Left speaker