Receiving Broadcast Stations; Listening To Fm/Am Radio - Kenwood R-K1000 Instruction Manual

Receiving Broadcast Stations

This section explains how to listen to the FM/AM radio and set radio stations.
ClearA
SLEEP TIMER DISPLAY DIMMER
MODE
ROOM EQ SOUND
FLAT TONE
MODE PRESET
ENTER
TUNING
VOL
P.CALL
AUTO / MONO
TUNER D.AUDIO CD
BAND
MUTE
AUX PHONO TAPE
D-IN1 D-IN2 D-IN3
RANDOM REPEAT P.MODE CLEAR
RC-R0830E
26
R-K1000

Listening to FM/AM Radio

Simply pressing the [TUNER/BAND] key turns on the system and allows you to listen to
the radio.
1 1
Press the [TUNER/BAND] key to select "FM" or "AM".
Each time you press the key, the band switches between "FM" and "AM".
2 2
Select a station.
Choosing from stored stations (Preset Call)
Select a station that you have stored.
See P.28, 29 for more information on presets.
Selection with the [P.CALL] keys
Each time you press the [G] or [H] key (
( ), the tuning changes to the next stored station in sequence.
When you hold down the [G] or [H] key (
( ), the tuning changes to the next stored station in sequence at intervals
of approximately 0.5 seconds.
) or the [B] or [A] key
) or the [B] or [A] key