Kenwood R-K1000 Instruction Manual page 56

Setting the Timer
ClearA
SLEEP TIMER DISPLAY DIMMER
MODE
ROOM EQ SOUND
FLAT TONE
MODE PRESET
ENTER
TUNING
VOL
P.CALL
AUTO / MONO
TUNER D.AUDIO CD
BAND MUTE
AUX TAPE
PHONO
D-IN1 D-IN2 D-IN3
RANDOM REPEAT P.MODE CLEAR
RC-R0830E
56
R-K1000
9 9
Select "PLAY" or "AI PLAY".
Press the [A] or [B] key.
Press the [ENTER] key.
10 10
Select "CLEAR A ON" or "CLEAR A OFF".
Press the [A] or [B] key.
Press the [ENTER] key.
11 11
Set the volume.
Press the [A] or [B] key.
Press the [ENTER] key.
You cannot use the [VOL] key to set the volume.
You can also confi rm the settings in steps 4 to 11 by pressing the [D] key instead
of the [ENTER] key. Also, pressing the [C] key returns you to the previous setting
and allows you to specify that setting again.
Playback is at the volume set in step 11.
Playback begins at the specifi ed time and
the volume gradually increases to the level
set in step 11.
The volume adjustment range changes to
0 dB to minus infi nity (–∞) dB.
The volume adjustment range changes to
minus infi nity (–∞) dB to +8 dB.