Normal Playback; Preparing For Playback; Listening To A Source Component - Kenwood KAF-S500 Instruction Manual

Normal playback

Preparing for playback

Some preparatory steps are needed before starting playback.
(POWER)
Turning on the amplifier
1 Turn on the pow er to the related components.
2 Turn on the pow er to this amplifier by pressing the
(POWER) key.
Selecting the input mode
If you have selected a component connected to the DVD/ CD, VIDEO 2
or FRONT AUX jacks, make sure that the input mode setting is correct
for the type of audio signal to be used.
18 EN
INPUT MODE
POWER
9

Listening to a source component

INPUT SELECTOR
1
Use the INPUT SELECTOR knob (or INPUT SELECTOR keys)
and AV AUX key to select the source you w ant to listen to.
Selecting a source using each key.
1 "DVD/ CD"
2 "VIDEO 1"
3 "VIDEO 2"
4 "FRONT AUX"
2
Start playback from the selected source.
3
Use the VOLUM E CONTROL knob (or VOLUM E CONTROL
%¥fi keys) to adjust the volume.
VOLUME CONTROL
INPUT SELECTOR
VOLUME%¥fi