Adjusting The Digital Audio Player Input Level - Kenwood R-K1000 Instruction Manual

D.AUDIO D.AUDIO
ClearA
SLEEP TIMER DISPLAY DIMMER
MODE
ROOM EQ SOUND
FLAT TONE
MODE PRESET
ENTER
TUNING
VOL
P.CALL
AUTO / MONO
TUNER D.AUDIO CD
BAND MUTE
AUX PHONO TAPE
D-IN1 D-IN2 D-IN3
RANDOM REPEAT P.MODE CLEAR
RC-R0830E
36
R-K1000

Adjusting the Digital Audio Player Input Level

Use the procedure below to adjust the input level for the external
component connected to the [D.AUDIO] terminal.
Use this adjustment when the volume from an external component is
noticeably higher or lower than other input sources at the same volume
setting.
1 1
Press the [D.AUDIO E] key.
2 2
Press the [MODE] key.
3 3
Select "INPUT LEVEL".
Press the [A] or [B] key.
Press the [ENTER] key.
4 4
Set the input level.
Press the [A] or [B] key.
Press the [ENTER] key.
If you adjust the input level for D.AUDIO, the output level from the [TAPE OUT]
terminal will also change.
You can adjust the input level in a range
from –3 to +5.