Table of Contents
Advertisement
72
Moving a single track
The following procedure shows you how to select a single tracks (track number) and move (insert) it at the
desired destination position in the series of track numbers. After the tracks have been moved, the track
numbers before and after them will be adjusted automatically. By repeating this operation, you can reor-
der the tracks in the desired order.
Before starting MD editing, be sure to cancel the pro-
gram mode by pressing the PGM key in stop mode.
Select the "MD" input ⁄
1
Select "MOVE".
1
Press the TRACK EDIT key.
2
Select "MOVE".
4
P.CALL
3
Set it.
(To initiate TRACK MOVE during playback,
go to step 3.)
2
Select the track to be moved.
1
Select a track number.
4
P.CALL
To decrease
track No.
2
Set it.
(MOVE)
TRACK EDIT
¢
SET
¢
To increase
track No.
SET
÷ Pressing the key in the middle of playback initiates
pause.
÷ To cancel the operation in the middle, press the
TRACK EDIT key any time before step
Each press of the 4 or ¢ keys switches the op-
eration.
When pressed in
stop mode
1 "MOVE"
2 "COMBINE"
3 "ERASE"
M O V E
0
0 1
M O V E ?
0
0 5
M O V E ?
Track to be moved
MD Edit Functions
4
.
When pressed in play
mode
1 "DIVIDE"
2 "COMBINE"
3 "ERASE"
4 "MOVE"
Advertisement
Table of Contents
