Table of Contents
Advertisement
Please refer to pages 14 and 15 for setup.
Select ANGLE mark ON or OFF
1 During stop mode, press MENU key on the re-
mote.
MENU
2 Press Cursor up/down (5/∞) keys on the re-
mote to select the GENERAL SETUP, then
press the ENTER key to access the sub fea-
tures
MULTI CONTROL
ENTER
3 Press Cursor up/down (5/∞) keys on the remote
to select ANGLE MARK, then press the Cursor
right (3) key to access the sub features
MULTI CONTROL
MULTI CONTROL
4 Press Cursor up/down (5/∞) keys on the remote
to select ON or OFF, then press the ENTER key.
5 Press Cursor left (2) key on the remote to return
to previous menu.
6 Press Cursor up/down (5/∞) keys on the remote
to select MAIN PAGE, then press the ENTER key.
MULTI CONTROL
ENTER
7 Press Cursor up/down (5/∞) keys on the remote
to select EXIT SETUP, then press the ENTER key.
MULTI CONTROL
ENTER
Select OSD Language
1 During stop mode, press MENU key on the re-
mote.
MENU
2 Press Cursor up/down (5/∞) keys on the re-
mote to select the GENERAL SETUP, then
press the ENTER key to access the sub fea-
tures
MULTI CONTROL
ENTER
3 Press Cursor up/down (5/∞) keys on the remote
to select OSD LANG, then press the Cursor right
(3) key to access the sub features
MULTI CONTROL
MULTI CONTROL
4 Press Cursor up/down (5/∞) keys on the remote
to select specific language, then press the EN-
TER key.
MULTI CONTROL
ENTER
5 Press Cursor left (2) key on the remote to return
to previous menu.
6 Press Cursor up/down (5/∞) keys on the remote
to select MAIN PAGE, then press the ENTER key.
MULTI CONTROL
ENTER
7 Press Cursor up/down (5/∞) keys on the remote
to select EXIT SETUP, then press the ENTER key.
17
Set Up functions
DVF-3070 (EN/E,T,X,Y)
Advertisement
Table of Contents
