Program Play - Kenwood DVF-3070 Instruction Manual

Program play

You can listen to the desired tracks of the current CD or VCD in any desired order.
Program Edit
1
During stop mode, press the P.MODE key on
the remote.
P.MODE
2
Select specific track by Press Cursor up/down
(5/∞) keys.
MULTI CONTROL
3
Select "ADD" icon on the screen to register
selected value onto PROGRAM LIST, then
press the ENTER key.
MULTI CONTROL
ENTER
4
You can select maximum 21 values by repeating
step 2 - 3.
5
Select "PLAY" icon on the screen. then press
the ENTER key to start program play.
Display
To repeat program play
During program playback, press the REPEAT
key on the remote.
REPEAT
Each press the key switches the mode.
1 "REPEAT ONE"
2 "REPEAT ALL"
3 "REPEAT OFF"
Lit
Program edit screen appears.
Track No.
TRACK
01
[12]
SET TRACK VALUE
Number of tracks
recorded on the disc.
Note Note Note
"ADD" icon : Add value onto "PROGRAM LIST"
"DELETE" icon : Delete value from "PROGRAM LIST"
"INSERT" icon : Insert value in "PROGRAM LIST"
"PLAY" icon : Play program play
"CLEAR" icon : When this icon is selected and the ENTER
key is pressed, the entire contents of the
PROGRAM LIST will be deleted, and the
Program edit screen also will disappear.
÷ MP3/JPEG discs can not be programmed with this program
mode. (MP3/JPEG program playback
÷ The unit stops when the STOP (7) key is pressed. To restart
program play, press the P.MODE key, display the program
screen, select the "PLAY" icon, and press the ENTER key.
DVF-3070 (EN/E,X,Y)
PROGRAM LIST
ADD
DELETE
PLAY
CLEAR
Program list
w
)
33